Sequencing - GE DVMRe CT II User Manual

Update Interval
NTP Primary Server
NTP Backup Server
Last Update: Never Since Power-up
Warning: Region/Time Zone must be set correctly!

3.9 Sequencing

Use this menu to specify:
•
The multiscreen dwell time.
•
The full screen dwell time.
The dwell time is the amount of time each camera is displayed on-screen (while sequencing) before
advancing to the next camera.
Main Menu → Sequencing → Multiscreen Dwell
Rotate the Jog to change the desired dwell time (from 1 to 30 seconds).
The default is 3 seconds.
1. Press the Enter button to confirm the selection and exit the menu.
2. Press the Menu button to exit the menu without making changes.
Main Menu → Sequencing → Fullscreen Dwell
Rotate the Jog to change the desired dwell time (from 1 to 30 seconds).
The default is 3 seconds.
1. Press the Enter button to confirm the selection and exit the menu.
2. Press the Menu button to exit the menu without making changes.
0150-0313B
Network Time Protocol Setup
: DISABLE
: 3. 37.
: 0.
[CANCEL] [OK]
33
8. 26
0. 0. 0
Multiscreen Dwell
Fullscreen Dwell
Multiscreen Dwell
(Time in Seconds)
(Time in Seconds)
03
Fullscreen Dwell
03
DVMRe CT II