GDK-162/100/FPII/20W & LDK-24/100/300/300E WOTS
Wireless Terminal (GDC-345H) User Guide
Appendix. C The LCD Messages Related To a Call
The followings describe messages displayed on the LCD of an attendant station and the wireless
terminal in Talking Mode.
VOLUME
At the DKTU,
(1) NO RESPONSE CT
Description : After key system requests a call to the wireless terminal, if there is no
A. Called station : Power-off
B. Called station : Out-of-svc area
(2) NO CHANNEL
Description : There is not enough system resource. If the message is displayed frequently
There is no available RF channel ; WTIB side
- The reason is brought by WTIB.
- All RF channels are fully used.
There is no available PCM Hi-way ; MPB side
- The reason is brought by MPB.
(3) INVALID
Description : When a station not subscribed is called. The reason is brought by MPB.
(4) NO RESPONSE : STA xxx
Description : After key system requests a call to DKTU, if there is no response from the
When a called DKTU does not respond;
- The reason is brought by MPB.
- It is not applicable to attendant station.
STOP!
The attendant station is not applicable for this case. When time-out is occurred, the call is
released.
(5) RELEASED : STA xxx
Description : After key system requests a call to the wireless terminal, if there is no
When a called WHTU does not respond;
- The reason is brought by WTIB.
(6) DESUB. Fail
response from the wireless terminal, this message is displayed on the LCD of
DKTU.
on the LCD of DKTU, the system should be installed more.
wireless terminal, this message is displayed on the LCD of DKTU.
response from the wireless terminal, this message is displayed on the LCD
of DKTU.
80