Panasonic AG-HPG10P Operating Instructions Manual page 39

4) Clip information
The following information is displayed.
CLIP NAME: Clip name
START TC: Time code when recording was
started
START UB: User's bit when recording was
started
DATE: Date on which the clip was
recorded
TIME: Time at which the clip was
recorded
DURATION: Length of the clip
V_FORMAT: Recording format of the clip
FRAME RATE: Playback frame rate
REC RATE: Recording frame rate (displayed
on clips specially recorded by the
camera recorder)
When or is pressed, the information of the
previous or next clip is displayed.
5) Clip meta-data
Items for referencing the detailed information
on the clips (clip meta-data) are displayed.
6
If necessary, reference the clip meta-data
contents.
When the clip meta-data item is selected using
and , and then is pressed, the following
information is displayed.
GLOBAL CLIP Global clip ID
ID: (a unique number which is not
assigned to any other clips in the
world)
USER CLIP Clip name which can be assigned by
NAME: the user
Normally, the GLOBAL CLIP ID is
provided as the clip name.
VIDEO: Video signal system, etc. (frame rate,
pull-down, aspect ratio)
AUDIO: Audio channel system, etc. (sampling
rate, bit rate)
ACCESS: Last update date, etc.
(name of the person who created
the clip and date on which it was
created, date on which the clip was
last updated and name of the person
who last updated the clip)
DEVICE: Serial number of device used to
record the clip (name of the device
manufacturer, serial number, model
number)
SHOOT: Recording start and end dates, etc.
(name of person who shot the clip,
date on which shooting started, date
on which shooting ended, shooting
location information, altitude,
longitude, latitude, shooting location
information source, shooting location)
SCENARIO: Program name, scene number, etc.
(program name, scene number, take
number)
NEWS: Reporter, news-gathering object, etc.
(reporter, purpose of news gathering,
object of news gathering)
MEMO: TEXT MEMO number, position,
name, text content (no., recording
position, person who input the memo,
text information)
• An OFFSET is indicated by
the number of frames from the
beginning. On a thumbnail text
memo display, this OFFSET is
indicated as a time code instead.
• Texts consisting of up to 1,000
characters can be attached, but
only the first 100 characters will
actually be displayed.
• The left and right cursors are used
to move from one text number to
another.
THUMBNAIL: Information on the thumbnail images
The frame positions and sizes
(frame offset, height and width) of
the thumbnail source images are
displayed.
7
Press [MENU/MODE CHK], and select
"EXIT" to exit.
39