Table of Contents
Advertisement
DX Air Curtain
Operation section
Push each button to select a desired operation.
•
The details of the operation needs to be set up once, afterwards, the air conditioner can be used by
pushing
button (Air volume select button)
1
Selects the desired air volume mode.
button (Timer set button)
2
TIMER SET button is used when the timer is
set up.
button (Check button)
3
The Check button is used for the check
operation. During normal operation, do not use
this button.
button (Ventilation button)
4
Ventilation button is used when a fan which is
sold on the market is connected.
•
If "No function
remote controller when pushing the
Ventilation button, a fan is not connected.
5
button (Filter reset button)
Resets (Erases) "FILTER
button (Power save operation)
6
SAVE button is used for power save operation.
button (Swing/Wind direction button)
7
No function.
Operation lamp
8
Lamp is lit during operation. Lamp is off when
stopped.
Although it flashes when operating the
protection device or abnormal time.
button only.
" is displayed on the
" display.
9
When the button is pushed, the operation
starts, and it stops by pushing the button again.
When the operation has stopped, the operation
lamp and all the displays disappear.
button (Operation select button)
10
Selects desired operation mode.
Button (Unit/Louver select button)
11
Select a unit number (left) and louver number
(right).
UNIT:
Selects an indoor unit when adjusting wind
direction when multiple indoor units are
controlled with one remote controller.
LOUVER:
No function.
button (Set up temperature button)
12
Adjust the room temperature.
Set the desired set temperature by pushing
OPTIONS:
Remote controller sensor
Usually the TEMP.sensor of the indoor unit senses the
temperature. The temperature on the surrounding of the
remote controller can also be sensed.
For details, contact the dealer from which you have
purchased the air conditioner.
30
button
or
Owner
.
Advertisement
Table of Contents
