Special Tools - Yamaha WR450F 2-TRAC Supplementary Owner's Service Manual

SPECIAL TOOLS

The following special tools are necessary for complete and accurate tune-up and assembly. Use only the
appropriate special tools; this will help prevent damage caused by the use of inappropriate tools or
improvised techniques. Special tools may differ by shape and part number from country to country. In
such a case, two types are provided.
When placing an order, refer to the list provided below to avoid any mistakes.
Tool No.
Puller
90890-XXXXX
(1874-01)
Use this tool to remove the pump sprocket
(hydraulic transmission).
Bushing remover
90890-XXXXX
(1702-02)
Use this tool to remove the front forks bushing.
Tool cartridge top cap
90890-XXXXX
(1797-01)
Use this tool to remove and install the front
forks damper rod.
Mounting sleeve
90890-XXXXX
(1799-02)
Use this tool to install the front forks bushing
and seals.
Tool compression adjuster (Bob)
90890-XXXXX
(1860-01)
Use this tool to unscrew and screw the front
forks top cap.
Mandrel ball joints (26 mm)
90890-XXXXX
(0721-01)
This tool is needed to remove and install the
ball joints.
Sleeve (26 mm)
90890-XXXXX
(0723-01)
This tool is needed to remove and install the
ball joints with the mandrel.
Tool name/How to use
4
SPECIAL TOOLS
Illustration
GEN
INFO