Table of Contents
Advertisement
Subfunction 22. Host X -ON/X -OFF Characters.
Data Block
byte 0 : character for host X -ON function
byte 1: character for host X-OFF function
Validation: Two bytes must be given.
Subfunction 23. Device X -ON/X -OFF Characters.
Data block
byte 0 : character for device X -ON function
1 :
character for device
X
-OFF function
Validation: Two bytes must be given.
Subfunction 24. Host ENQ/ ACK Characters.
Data block
byte 0 : character for host ENQ function
1 :
character for host ACK function
Valida tion: Two bytes must be given.
Subfunction 25. Host ENQ/ ACK Pacing Counter.
Data block
byte 0: the number of characters to transmit before sending an ENQ and
waiting for an ACK (count should be
1
to 225)
Validation: One byte must be given.
HP 27130B
Subfunction 27. Single Text Terminator for Echoing CR -LF. Anyone of the single text terminator
characters may be specified to cause the echoing of the CR -LF characters. However, only one charac-
ter may be used for the special echoing function. This character is specified in the data block for this
subfunction.
Validation: none
Subfunction 28. Output Separator.
Data block
byte 0 : lst output separator character or null
1 :
2nd output separator character or null
Validation: Length must be either one or two characters.
4-33
Advertisement
Table of Contents
