Connections; Connection With Usb Interface; Setting Dip Switches - Mitsubishi Electric CP30DW Operation Manual

CONNECTIONS

CONNECTION WITH USB INTERFACE

2 2 2 2 2
CONNECTING WITH PC
Connect this unit with a personal computer as following example.
Personal computer
A USB cable is not supplied with this unit. Use the USB 2.0 certified cable of 2 m or less in
length.
2 2 2 2 2

SETTING DIP SWITCHES

All the switches are set to OFF at the time of shipment from the factory.
Turn off the power before changing the DIP switch settings.
Switch No. Setting
1 OFF
ON
2 OFF
ON
3 OFF
ON
4 OFF
ON
5 OFF
ON
6 OFF
ON
7 OFF
ON
8 OFF
ON
1
* USB i-Serial No. means a unique ID which each USB device has.
* 2 For the detail of printing mode, refer to the PRINTER DRIVER GUIDE.
To USB port
NOTE
SETTING DIP SWITCHES
Function
USB i-Serial No.* 1 is disable.
USB i-Serial No.* 1 is enable.
Set this switch to OFF.
Set this switch to OFF.
Set this switch to OFF.
Set this switch to OFF.
This unit prints images according to the printing mode setting of the
printer driver.* 2
This unit prints images in power save mode regardless of the printing
mode setting of the printer driver.*
Set this switch to OFF.
Set this switch to OFF.
To USB port
Digital printer
2
11