Uploading Measurement Data - Epson Runsense SF-710 User Manual

SF-310/510/710 Smartphone User's Guide
Uploading Measurement
Data
Upload measurement data to the web application
(RUNSENSE View.)
Take the following two steps to upload data via an
iPhone.
Uploading outline data
Upload data such as the distance, speed, HR, and
calories.
Uploading detailed data
Upload the running route in addition to the outline
data.
c
Important:
❏ You need to log in to RUNSENSE View and
register this product to the iPhone.
"Preparation" on page 5
U
❏ Enable Bluetooth on the iPhone before

uploading measurement data.

"Enabling Bluetooth on your iPhone"
U
on page 10
Note:
It is recommended to upload the data via a personal
computer by setting this device in the cradle when
uploading data worth several hours such as
measurement data of a full marathon (uploading 4-hour
worth data with iPhone takes roughly 12 minutes.) Refer
to "Data Management Using the Web Application
(RUNSENSE View)" in the "User Manual" for how to
upload data via a personal computer.
Uploading and Checking Measurement Data
14
A
Start Run Connect on your iPhone.
B
Tap Watch Data.
C
Hold down D on this product.
Bluetooth communication starts.