Operation
Loading Film
Film loading path in the DFP-R3000
1
Release the pad roller.
2
Pull out a suitable length of film from the supply
reel, and feed it along the path indicated by the
black line on the front panel.
Note
When other audio playback equipment is
equipped between the DFP-R3000 and projector,
be sure to feed the film with bypassing the other
equipment.
3
Pass the film through the projector and take it up
on the takeup reel, just as you would with
ordinary movie film.
4
Return the pad roller to the original position.
12(E)
To the supply reel
Sprocket
IN
PASS
OUT
Pad roller
To the projector
Loading film other than SDDS
1
Pull out a suitable length of film from the supply
reel, and feed it along the path indicated by PASS
on the front panel.
2
Pass the film through the projector and take it up
on the takeup reel, just as you would with
ordinary movie film.
3
Return the pad roller to the original position.
Handling SDDS film
• Avoid marking the SDDS data tracks using either
adhesive labels or ink. If it is essential, keep any
marks within a frame.
• The splice length should also be not more than a
frame.