Setting Voice Mail Parameters - Panasonic KX-TVP150 User Manual

Hide thumbs Also See for KX-TVP150:
Table of Contents

Advertisement

3.3.3
Setting Voice Mail Parameters
3.3.3.1
Mailbox Parameters
Number of Mailboxes
The Number
of Mailboxes
defines the maximum
total
number of mailboxes maintained by the VPS, including the
general delivery mailbox, the system manager's mailbox,
the message manager's mailbox
and the bulletin board
manager's mailbox. The initial setting of 64 can be set from
64 to 512 in 64 increments.
Personal Greeting
Message Length
The personal greeting message length can be set from 8 to
60 seconds in 4 second increments. The initial setting is 16
seconds.
System Mailbox Parameters
The system mailbox parameters are specified by the System
Administrator.
When a new mailbox
is created, these
parameters are used as initial
values for the mailbox
parameters. The mailbox parameters for each individual
mailbox can be specified according to the needs of the sub-
scriber and the storage capacity of the system.
System Message
Retention Time
System Maximum
Message Length
System Mailbox Capacity
Manager's Guide
System Administrator
M-3- 17
The system message retention time is the amount of time
which a subscriber may wish to keep a message prior to
automatic erasure for the most effective utilization of stor-
age capacity. It can be set to between 1 and 7 days. It is set
for 5 days at the factory.
The maximum
recorded length of a message can be set
between 1 and 12 minutes. It is set for 3 minutes at the fac-
tory.
This is the maximum number of messages which can stay
in one mailbox at one time. It is set from 5 to 50 depend-
ing upon the needs of the subscriber and the storage capac-
ity of the system. When the number of messages in the
mailbox has reached the limit specified by the parameters,
a caller can no longer leave any messages. It is set to 10 at
the factory.
Standard Mailbox Parameters can be set up by the System
Administrator,
usually in response to a request from a sub-
scriber. If you set a Mailbox Parameter to S (System), then

Advertisement

Table of Contents
loading

Table of Contents