Exit Llrp; Llrp Registry Entries - Motorola MC3090Z User Manual

3 - 8 MC3090Z RFID Mobile Computer Integrator Guide

Exit LLRP

Tap the LLRP icon, then tap
To restart LLRP after exiting, use
executable (MobileLLRP.exe).

LLRP Registry Entries

RFID (LLRP) does not run when the MC3090Z is charging. Developers who require using the cradle with RFID
enabled can select Developer Mode by modifying a registry entry.
•
- In this default mode, placing the mobile computer in the cradle (with charging on) disables LLRP
User Mode
and the LLRP icon indicates that it is disconnected. Placing the mobile computer on AC power charges the
device and disables LLRP. Removing AC power reconnects LLRP.
•
Developer Mode
computer in the cradle for debugging and development. The device remains in Developer Mode regardless of
whether it is charging until re-enabling User Mode.
To select Developer Mode via registry:
Edit the file
1. params.reg
mobile computer.
Set the
2. DevMode
[HKEY_LOCAL_MACHINE\SOFTWARE\Symbol\RFID\LLRP]
"DevMode"=dword:00000001
Tap on the modified file and select
3.
Warm boot the device by holding down the
4.
Restart LLRP (if it is not already running).
5.
To change back to user mode, repeat this procedure, setting
LLRP checks AC power every five seconds and takes the appropriate action based on whether or not it is in User
Mode.
to close the LLRP application.
Exit
to browse to the
File Explorer
- Selecting Developer Mode disables charging and the developer can place the mobile
in the folder. To do this, copy the file to the PC, or use a word editor on the
\Application
registry entry value to 1:
to merge the registry.
Yes
7
\Application\LLRP
, , and keys.
9 Power
to .
DevMode 0
folder and tap the LLRP