Section 3 - Installation
Setting up the NAS
With the power on, press the Next button on the device and check and make
sure the IP address of your ShareCenter matches what you see on the screen.
Note: Allow 1-2 minutes for the DNS-320L to be recognized.
Click Next to continue.
Note: To double-check the NAS's IP address, go to settings of your local router
and check the IP address table.
A warning message will appear prompting you to confirm that the LED on
the front of your device is blinking. If so, click Yes to proceed.
Click Next to continue.
D-Link ShareCenter DNS-320L User Manual
24