Turn On The Computer - Panasonic CF-U1 series Operating Instructions Manual

Hide thumbs Also See for CF-U1 series:
Table of Contents

Advertisement

9
Click [Reinstall Windows] and click [Next].
The License Agreement screen appears.
10
Click [Yes, I agree to the provisions above and wish to
continue!] and click [Next].
11
Select the settings and click [Next].
l [Reinstall Windows to the whole Hard Disk to factory default.]
Select this option when you want to reinstall Windows to the factory
default. After reinstallation, you can create a new partition. For how to
create a new partition, refer to "To change the partition structure"
(è page 29).
l [Reinstall to the first 2 partitions.]
Select this option when the flash memory has already been divided into
several partitions. For how to create a new partition, refer to "To change
the partition structure" (è page 29).
You can keep the partition structure.
This does not appear if Windows cannot be reinstalled to the recovery
*1
partition and the area usable by Windows.
12
At the confirmation message, click [YES].
Reinstallation starts according to the instructions on the screen. (It will take
approximately 50 minutes.)
l Do not interrupt reinstallation, for example by turning off the computer or
pressing
come unavailable as Windows may not start up or the data may be
corrupted.
13
Remove the Product Recovery DVD-ROM, and then click
[OK] to turn off the computer, then remove the DVD drive.
14

Turn on the computer.

l If the password is requested, enter the Supervisor Password.
15
Perform the steps 3 to 5 for setting up the computer
(è pages 26 and 29).
16
Start the Setup Utility to change the settings as necessary.
17
Perform Windows Update.
,
and
+
*1
(Del). Otherwise reinstallation may be-
35

Advertisement

Table of Contents
loading

Table of Contents