Sound System Overview; Setup And Operation - Whirlpool COOLVOX Quick Start Manual

Designed for the top of the refrigerator; low profile to fit
underneath cabinets, reducing countertop clutter.
Angled speakers fill the kitchen with sound.
Intelligent equalization (EQ) technology: Digital signal
processing (DSP) to optimize system dynamics and bass
impact.
Bi-amplification: the woofers and mid-range to high-range
speakers are independently driven by digital Class D
amplifiers for exceptional richness and clarity of sound.
Advanced transducers: Specially designed woofers produce
extended bass performance with minimal distortion. Mid-
range to high-range speakers project musical details over a
wide listening area.
1. Remove the CoolVox™ kitchen sound system from its
packaging and remove all film.
2. Place the sound system on top of the refrigerator with the
front edge aligned with the front of the refrigerator cabinet.
3. Plug the power cord into the wall outlet. The status LED (A)
will glow amber.
4. Pair and Play.
The sound system pairs easily with your smart phone, tablet,
or other Bluetooth device. It has a range of approximately
30 ft (9 m), so you can enjoy the sound you want without
wires.
Press and release the Power/Pair button (B) on the control
panel. The Status LED (A) will flash blue.
Select the CoolVox™ kitchen sound system from your
device.

SOUND SYSTEM OVERVIEW

SET UP AND OPERATION
A B
A. Status LED B. Power/Pair
Amber -
Standby Mode
Blinking Blue -
Pairing Mode
Solid Blue -
Connected
Seamless Bluetooth ®† connectivity and NFC pairing option for
Androids.
Drivers: Four mid-range to high-range speakers and two
woofers
Power: mid-range to high-range: 4 x 6 watts @ 1% THD
Woofers: 2 x 10 watts @ 1% THD
Frequency response: 70Hz – 20kHz
Interface: Bluetooth ® A2DP music streaming
Power supply input voltage: 100 – 240V AC, 50-60 Hz
Dimensions: 29" x 8¹⁄₂" x 1¹⁄₂" ( 737 mm x 216 mm x 38 mm)
Weight: 4.3 lb (1.95 kg)
†®BLUETOOTH is a registered trademark of Bluetooth SIG, Inc.
CoolVox
The Status LED (A) will glow solid blue when the sound
system is properly paired with your Bluetooth device.
You are now ready to play your music through CoolVox.
Use the controls of your Bluetooth-enabled device to
start, stop, or pause the audio.
NOTES:
If another device is already paired with the CoolVox™ sound
system, press and hold the Power/Pair button (B) on the
control panel for 3 seconds to cancel the existing pairing.
Then, re-pair with different device by performing Step 4.
The CoolVox™ sound system will remember the six devices
most recently used, so it is even simpler to reconnect.
C
C. Volume
CoolVox
Accept
3