Bd Internet Access; Ip Control Setup; Communication Setup - Sharp SD-WH1000U Operation Manual

Communication Setup

7
Press a/b to select your appropriate security
key, then press ENTER.
• When selecting WPA/WPA2, selectable security keys
are PSK/TKIP and PSK/AES.
8
Press ENTER, then enter the security key code.
• Enter the exact same security key which has been
set in the wireless router.
• The security key code is manually entered using the
screen for inputting characters.
9
Select "Next" , then press ENTER.
10
For testing after confirming the settings, select
"Test" , then press ENTER.
• If the test has failed, an error message appears.
Retry to perform the settings after checking that the
connection (page 23) is performed properly.
• Follow 3-8 of ("Ethernet Setup (Cable)" on page
complete the network connection settings.
11
Press a/b to select "Complete" , then press
ENTER.
Information on Mac addresses
A Mac address is a unique ID number for network
equipment. A Mac address is necessary for Mac
address filtering on the wireless router/access
point.
Before the wireless communication setup is
performed, we recommend writing down the Mac
address and keeping it in a safe place. (The Mac
address is displayed on the "Current Ethernet
setup info." screen when wireless communication
is set (See step 2).)
Mac address

BD Internet Access

This allows you to set access restriction to BD-LIVE
contents.
Item
Permit: Allows all BD-LIVE discs.
Limit: Allows only discs with owner certification.
Prohibit: Prohibits all BD-LIVE discs.
NOTE
• The available functions differ depending on the disc.
• Regarding playback method of BD-LIVE contents,
etc., perform the operations in accordance with the
instructions in the BD disc manual.
• To enjoy BD-LIVE functions, perform the broadband
Internet connection (pages
settings (pages 47 , 48).
47
22 , 23) and communication

IP Control Setup

This player can be controlled from a PC, Home
Control, Smart phone, Tablet PC using IP.
If you want to control by using Mobile App., you have
to enable this item.
Use a cross-type RS-232C cable, ETHERNET cable
(commercially available) or wireless LAN for the
connections.
Press a/b to select "Change" , then press ENTER.
• For initializing the current setting, select "Initialize" , then
press ENTER.
Item
Enable: Enables local network streaming. A broadband
to
internet connection is required, and special hardware/
software configurations are required.
Disable: Disables local network streaming.
NOTE
• This operation system should be used by a person who is
accustomed to using computers.
Communication conditions for IP
Connect to the player with the following settings
made for IP on the PC, Smart phone, Tablet PC, etc.
IP protocol:
Host IP address:
Service:
TCP port#:
When you set your ID and password on the player
menu, you need to enter them as soon as you
connect to the player.
NOTE
• The connection will be cut off when there has been no
communication for 3 minutes.
• Communication procedure (see page i)
48
TCP/IP
Set the IP address on the player
menu
None (Do not select Telnet or SSH)
Set a port number on the player
menu