Panasonic AJ-PG50 Operating Instructions Manual page 117

Item Message
CANNOT ACCESS
CARD!
CANNOT ACCESS
TARGET!
CANNOT COPY!
FORMAT STORAGE
DEVICE TO FAT
CANNOT FORMAT!
CANNOT RECOGNIZE
STORAGE DEVICE!
CANNOT SELECT!
MAX.6 PARTITIONS
Stor- CARD IS EMPTY!
age CANNOT COPY!
FORMAT P2 CARD!
LACK OF CAPACITY!
MISMATCH
COMPONENT!
TOO MANY PARTITIONS! There are too many partitions.
UNKNOWN DEVICE
CONNECTED!
VERIFICATION FAILED!
CANNOT CHANGE!
Soft-
CANNOT SET!
ware
key-
INVALID VALUE!
board
AUTHENTICATION
ERROR!
Description
An error occurred during P2 card access.
An error occurred while attempting to access the
connection target.
The clips cannot be copied because there is no
partition to which to copy clips on the storage de-
vice.
The storage device cannot be formatted.
The storage device cannot be recognized prop-
erly.
A storage device with more than six partitions
cannot be selected (simultaneous mounting of
partitions).
The P2 card to be copied is empty.
Importing to a P2 card containing clips is not
possible.
Not enough free space left on the storage de-
vice.
The model numbers of the copy source P2 card
and copy destination P2 card do not match.
Copying is not possible.
An unsupported DVD drive or other device is
connected.
Verification after copying failed.
An attempt was made to change PERSON when
no text memo had been entered.
The entered value is invalid.
Manual authentication failed.
Check the P2 card.
Check the storage device status and connection.
Reformat in FAT format or export the data from a P2
card to create a partition.
Connect a different storage device.
Reboot the storage device or connect a different stor-
age device.
Cancel some of the selected partitions.
Copying will not be performed since the card is emp-
ty.
Format the P2 card.
Use a new storage device with enough free space or
a formatted storage device.
Use P2 cards of the same model number or import
clips individually.
The maximum number of partitions for a storage de-
vice is 23. Use a new storage device or reformat the
storage device.
Connect a supported storage device, and then turn
the power off and then back on.
Copy the data again.
First enter a text memo.
Enter a valid value.
Enter the correct password.
For Long and Trouble-Free Operation: Warning System
Measure
117