Samsung SMT-W5100E Quick Setup Manual page 2

Select <1> On for QoS (WMM)
xv.
Skip encryption by pressing <OK>. (It takes about 30 seconds to complete one
xvi.
handset registration.)
Default wireless IP handset extension number starts with 3301. Use MMC 724
xvii.
to change numbering plan.
Repeat the above process for each handset.
c.
Preparing System for OfficeServ Wireless Product
1: System Components
Load OS 500 or OS 100 or OS 7200 system with MCP2 software version 2.6x or up. OS
1.
7400 with MP40 software version 3.2x and up.
Connect both MCP and MGI to the same data network and have the IP addresses
2.
programmed.
Connect the WAN port of dual band APs (SMT-R2000) to the same data (subnet)
3.
network.
Power on the system.
4.
Power on AP either through the power adaptor or PoE switch.
5.
2: Pre-determinate the following data
System IP address
1.
System Gateway IP address
2.
WLAN SSID
3.
AP IP addresses (can be different that the system subnet but must be unique for each
4.
AP)
AP RF channels (frequency planning)
5.
AP external antenna on or off
6.
Handset IP addresses
7.
Static WIP IP registration enable or disable
8.
WEP key enable or disable
9.
For example:
Sample Configuration Table (3 APs + 4 Handsets)
System IP:
1.
MGI IP:
2.
System gateway:
3.
SSID:
4.
AP TX Power:
5.
AP1 IP:
6.
© SAMSUNG Telecommunications America
192.168.1.5
192.168.1.7
192.168.1.1
80211g
100% (max)
192.168.111.11
2
01/2007