Function; Video Menu Options; Adjusting Video; Apc (Auto Picture Control) - LG AN110B-JD Owner's Manual

Function

Function
* In this manual, the OSD(On Screen Display) may be different from your Projector's because it is just example to help
with the Projector operation.
* If there is no input signal present, the Menu will not be displayed on the screen.
* This operating guide explains operation of RGB(PC) mode mainly.

Video Menu Options

Adjusting Video

1. Press the MENU button and then use
G
2. Press the button and then use
want to adjust.
F G
3. Press the button to adjust the screen condition as you want.
,
A
4. Press the OK button to save.
G Each adjustment of
As required, re-adjust
Video/S-Video/Component (480i(576i)), Component (480p(576p), 720p, 1080i)
G To restore the original image condition after changing it, press
after selecting [Reset] item.
G In the broadcasting system NTSC, the picture item Tint is displayed and can
be adjusted.
G To exit the menu display, repeatedly, press the MENU button.

APC (Auto Picture Control)

* Use APC to set the projector for the best picture appearance.
* This function will not work in RGB mode.
1. Press the MENU button and then use
G
2. Press the button and then use
G
3. Press the button and then use
condition as you want.
A
4. Press the OK button to save.
G Each press of the D , E
Clear
G To exit the menu display, repeatedly, press the MENU button.
26
D E
button to select the
,
D , E
button to select a video item you
menu options will not affect other input source.
menu options for the following input source :
D E
button to select the
,
D , E
button to select
D , E
button to adjust the screen
button changes the screen as shown below.
Soft User
menu.
A
OK button
menu.
APC item.
< RGB mode >
G
Contrast 50
Contrast 50
Brightness 50
Reset
Menu Prev.
< Video mode >
G
APC Clear
APC
Contrast 80
Soft
Brightness 50 User
Sharpness 50
Menu Prev.
G
APC Clear
APC
Contrast 80 Soft
Brightness 50
User
Sharpness 50
Menu Prev.