LG BECON HVAC BACnet PQNFB17C1 Installation & User Manual page 36

26
INSTALLING ACP BACnet
Using dynamic IP using DHCP
For user to use the functions of the ACP BACnet through the web, a unique IP address may be
assigned to the ACP BACnet or dynamic IP setting may be used.
The next is how to set dynamic IP address.
Please proceed according to the order.
1.
Press [SET] button of the ACP BACnet. The following menu screen will be displayed.
• If you press [SET] button again, [Network Info] setting screen will be displayed.
• While DHCP is selected, if you press [SET] button, you can input whether to use DHCP
function.
2.
Use up and down (▲, ▼) buttons to set whether to use DHCP function.
• When you press up (▲) button, DHCP function is set to use, and if down (▼) button is
pressed, DHCP is set for no-use.
3.
To use dynamic IP, set to use DHCP function.
Caution
If dynamic IP type is used, the IP in use is returned by DHCP server and may not be able
y
to access the ACP BACnet.
In such case, you can check the newly set IP address in the front LCD of the ACP BACnet.
If you input the ACP BACnet IP address in the web browser, you can run the ACP BACnet
y
program again.
PQNFB17C0
PQNFB17C0
> Network Info
Contents
Function
Click
[SET]
Register FD
button
Click ▼
[Network Info]
button
> MC
four times
DHCP NO
Click
[SET]
button
NOT(0) / USE(1) : 0
NOT(0) / USE(1) : 1
Example of setting to use DHCP function
000.000.000.000
[Set DHCP]
[Set DHCP]