Sony HDC3300R Operation Manual page 35

Page title No. Item
<'!' IND> 02 ND
(U05)
CC
WHITE
5600K
GAIN
SHUTT
FAN
EXT
FORMAT
<VF MARKER> 03 MARKER
(U06)
CENTER
SAFETY ZONE
EFFECT
ASPECT
Default
[IND] ON
[NORMAL] 1 – – – –
[IND] ON
[NORMAL] – B – – –
[IND] ON
[NORMAL] – A B
[IND] ON
[NORMAL] OFF
[IND] ON
[NORMAL] – – L
[IND] ON
[NORMAL] OFF
[IND] ON
[NORMAL] AUTO1
[IND] ON
[IND] ON
[NORMAL] 59.94i
ON
WHITE
OFF
1
OFF
90.0%
OFF
OFF
4:3
MASK OFF
12
SAFETY OFF
90.0%
Settings Remarks
ON, OFF [IND]: Set whether to be
1, 2, 3, 4, 5 (combination
allowed)
ON, OFF
[NORMAL]: Specify the
A, B, C, D, E (combination
allowed)
ON, OFF, - - -
P, A, B (combination allowed)
ON, OFF, - - -
ON, OFF
ON, OFF, - - -
L, M, H (combination
allowed)
ON, OFF, - - - e.g.: With the default setting of
ON, OFF
ON, OFF
AUTO1, AUTO2, MIN, MAX
- - - : When CCU connected
ON, OFF
ON, OFF
59.94i, 50i, 59.94P, 50P
ON, OFF Except MASK
WHITE, BLACK, DOT
ON, OFF
1, 2, 3, 4 1: Entire cross
2: Entire cross with a hole
3: Center
4: Center with a hole
ON, OFF
80.0, 90.0, 92.5, 95.0%
ON, OFF, (FOCUS) (FOCUS): Displayed when
ON, OFF
16:9, 15:9, 14:9, 13:9, 4:3, (4.3): If VF SCAN is set to 4:3
(4.3)
ON, OFF, (ON) (ON): If VF SCAN is set to 4:3
0 to 15 Set the level to darken
outside the aspect area.
ON, OFF, (AREA) For the safety marker in
Aspect mode.
80.0, 90.0, 92.5, 95.0%
(AREA): Displayed when
included in the status
indications on the
viewfinder screen (see
page 27).
conditions under which the
'!' indication is not to be
displayed even if [IND] is
ON. (By specifying the
standard or normal
conditions here, non-
standard or abnormal
conditions can be found
with the '!' indication on the
viewfinder screen.)
ND, the '!' indication is
displayed when an ND filter
other than 1 is selected.
(cannot be changed)
INDICATOR of <FOCUS
ASSIST> is ON.
on HDLA attached (cannot
be changed)
on HDLA attached (cannot
be changed)
AREA MARKER of
<FOCUS ASSIST> is ON.
35
Menu List