Table of Contents
Advertisement
Operation
Screen Menu Options
Screen Menu Options
Setting the Picture Format
- You can watch the screen in various picture formats;
Full
(option),
Original
,
4:3
•
Spectacle
When your TV receives the wide screen signal, when select-
ed it will adjust the picture horizontally, in non-linear propor-
tion, to fill the entire screen.
•
Full
(option)
When your TV receives the wide screen signal, when select-
ed it will adjust the picture horizontally or vertically, in a linear
proportion, to fill the entire screen fully.
•
Original
When your TV receives the wide screen signal, it will be auto-
matically changed to the picture format to be sent.
•
4:3
Following selection will lead you to view a picture with an original 4:3
aspect ratio, with gray bars appearing at both the left and right sides.
•
16:9
(Wide)
Following selection will lead you to adjust the picture horizon-
tally, in a linear proportion, to fill the entire screen (useful for
viewing 4:3 formatted DVDs).
•
14:9
You can enjoy the picture format of 14:9 or general TV pro-
gramme through the 14:9 mode. The screen 14:9 is viewed
just like that the screen 4:3 is magnified to the left / right.
•
Zoom
Following selection will lead you to view the picture without
any alternation, while filling the entire screen. However, the
top and bottom portions of the picture will be cropped.
- You can only select
4:3
and
HDMI[PC] mode only.
- You can only select
4:3
,
RGB[DTV], HDMI[DTV], Component [DTV] mode only.
T
eletext (option)
T
eletext (option)
- Teletext (or TOP text) is an optional function, therefore only the
set with the teletext system can receive the teletext broadcast.
- Teletext is a free service broadcast by most TV stations which
gives up-to-the-minute information on news, weather, televi-
sion programmes, share prices and many other topics.
- The teletext decoder of this set can support the SIMPLE, TOP
and FASTEXT systems. SIMPLE (standard teletext) consists
of a number of pages which are selected by directly entering
the corresponding page number. TOP and
FASTEXT are more modern methods allowing quick and easy
selection of teletext information.
Teletext Language Selection
1. Press the MENU button and then use
the SPECIAL menu.
2. Press the
G G
button and then use
Language
.
3. Press the
G G
button and then use
Teletext Language
.
4. Press the
button to select the required language.
D D
E E
/
5. Repeatedly press the MENU button to return to normal TV
viewing.
20 PLASMA TV
Spectacle
,
16:9
(Wide),
14:9
and
Zoom
16:9
(Wide) in RGB[PC],
16:9
(Wide) and
Zoom
in
button to select
D D
/
E E
button to select
D D
E E
/
F F / G G
button to select
- You can only select
14:9
and
Zoom
,
- There might be uncomfortable in full mode. Then change into
.
other mode.
Picture Size Zoom
- When enlarging or reducing the picture, the screen may be
display an unnatural looking picture.
Screen Position
- This function is available after adjusting Zoom +/-.
Cinema
- When you watch the movie, this function adjusts the set to
the best picture appearance.
- This function works in the following mode:
TV, AV1, AV2, S-Video2, AV3, AV4, AV5 or COMPONENT
(480i/576i).
NR (Noise Reduction)
- You can select
which may appear on the screen during watching the TV.
- This function is not available for use in RGB[PC], HDMI[PC]
mode.
- 3D NR is not available for use in RGB, HDMI,
Component[DTV] mode.
Initializing (Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value
• You can initialize Phase, Clock, H-Position, V-Position,
Position, Zoom +/-, PIP size, PIP position, PIP Transparency
and sub picture size of twin picture.
Note :
a. Please select your local teletext language.
b. If you don't, the teletext may not appear correctly on the
screen.
Switch on/off
Press the
TEXT
• The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are dis-
played on the screen
headline. The first page number indicates your selection,
while the second shows the current page displayed.
Press the
TEXT
Spectacle
,
Full
(Option),
in Component [480i/576i] mode only.
or
to reduce the picture noise
3D NR
MPEG NR
button to switch to teletext.
button to switch off teletext.
4:3
,
16:9
(Wide),
Hide quick links:
Advertisement
Table of Contents
