Zero Configuration Setup; Connect The Camera - D-Link DCS-6045L User Manual

Section 2 - Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of Zero Configuration. Zero Configuration automatically
configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-6045L
and automatically add the camera to your mydlink account. After the short time it takes to do this you can remotely access
your camera from the www.mydlink.com website to manage and monitor your DCS-6045L.
Connect the PowerLine Adapter
Plug in the PowerLine adapter to a wall outlet. Connect an Ethernet cable
from the PowerLine adapter to your existing network.

Connect the Camera

Plug in the camera power cord into the DCS-6045L. Move the power switch
to the ON position and wait for the PWR, PLC, and LNK to turn green. If you
have an existing PowerLine adapter, you will need to press and hold the PLC
button on the camera for 5 seconds. After the PLC LED on the camera begins
blinking, press the PLC button on your existing PowerLine adapter within the
next 60 seconds.
D-Link DCS-6045L User Manual

Zero Configuration Setup

DHP-308AV
Internet Router
Green
15