General Fax Send Settings - HP Officejet Enterprise Color MFP X585 User Manual

Menu item
Redial On No Answer
Detect Dial Tone
Dialing Prefix

General fax send settings

1. From the Home screen on the product control panel, scroll to and touch Administration.
2. Open the following menus:
● Fax Settings
●
Fax Send Settings
● Fax Send Setup
● General Fax Send Settings
Configure any of the following settings:
Menu item
Fax Number Confirmation
PC Fax Send
Fax Header
JBIG Compression
78 Chapter 7 Fax
Description
The Redial On No Answer setting selects the number of times the fax accessory redials if
the number dialed does not answer. The number of retries is either 0 to 1 (used in the
U.S.) or 0 to 2, depending on the country/region setting. The interval between retries is
set by the redial interval setting.
The Detect Dial Tone setting determines whether the fax checks for a dial tone before
sending a fax.
The Dialing Prefix setting allows you to enter a prefix number (such as a "9" to access an
outside line) when dialing. This prefix number is automatically added to all phone
numbers when dialed.
Description
When the Fax Number Confirmation
twice to ensure that it was entered correctly. The feature is disabled by default.
Use the PC Fax Send feature to send faxes from a PC. This feature is enabled by default.
Use the Fax Header feature to control whether the header is appended to the top, and
content is shifted down, or if the header is overlayed on top of the previous header.
Enabling the JBIG Compression
transmission time and might be the preferred setting. However, using the
Compression feature might cause compatibility problems when communicating with
some older fax machines, in which case you might need to disable it.
NOTE: The JBIG Compression
machines have this capability.
feature is enabled, the fax number must be entered
feature can reduce phone-call charges by reducing fax
feature works only when both the sending and receiving
JBIG
ENWW