Using Call Forwarding; Automatically Forwarding Calls; Delayed Call Forwarding - Siemens OpenStage 30 T User Manual

Enhanced phone functions
Step by Step
64

Using call forwarding

Please note the description for programming call
forwarding

Automatically forwarding calls

The relevant service personnel can configure different
call forwarding settings in the system for internal and
external calls and activate these settings for your sta-
tion. The following calls may be forwarded
• All calls without restriction
• Calls on busy
• Calls on no reply
Forwarding for all calls without restriction should only
be configure if the station is only used for outgoing calls
(e.g. in an elevator).
If you have configured fixed or variable forwarding and
the manual forwarding destinations are not reachable
(e.g. busy), calls are automatically forwarded to system
forwarding destinations.

Delayed call forwarding

This forwarding type can be configured for initial and/or
second calls.
Initial call
Prerequisite: "Forwarding. no reply" is activated
page 31,
The caller hears the ring tone and is only forwarded to
another station once a set time (
elapsed.
Second call
Prerequisite: Second call
on busy/no reply" or "Forwarding. no reply" are activated
page 31.
You automatically receive a call waiting tone and infor-
mation about the caller with an incoming second call.
You then have the option of accepting this call before
call forwarding is activated (e.g. if you are waiting for an
urgent call).
page 31.
page 35) has
page 47 and "Forwarding