Basic Installation; Hardware Setup - D-Link DNS-321 User Manual

Section 2 - Installation
This section provides installation information for the DNS-321. To install the DNS-321 on your local network, refer to the steps below:
1. Slide the faceplate up until it unlatches from the device.
3. Insert a 3.5" SATA hard drive into an available drive bay.
D-Link DNS-321 User Manual

Basic Installation

Hardware Setup

2. Once the faceplate is unlatched, pull it off the device, exposing
the drive bays.
4. Attach the faceplate to the front of the device.
6