Epson PowerLite 1705c User Manual page 159

If you're using a PC notebook:
■ Hold down the
key that lets you display on an external monitor. It may have an
icon such as
seconds for the projector to sync up after pressing it. Check your
notebook's manual or online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
Depending on your computer's video card, you might need to use
■
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using Mac OS X:
1. Open
System Preferences
2. Click
Displays
3. Click
Detect Displays
4. Make sure the
5. Click the
6. Make sure the
The message
Make sure the correct input signal is selected in the Signal menu
■
(see page 118).
■ Make sure your computer's resolution doesn't exceed UXGA
×
(1600
the projector (see page 179). If necessary, change your computer's
resolution setting as described below.
Only part of the computer image is displayed.
■ Press the
Make sure the image
■
menu. See page 119 for more information.
Downloaded From projector-manual.com Epson Manuals
key on the keyboard and press the function
Fn
, or it may be labelled
key lets you toggle between the LCD
.
.
.
or
VGA Display
or
Arrangement Arrange
Mirror Displays
is displayed.
Not Supported
1200) and the frequency or refresh rate is supported by
button on the remote control.
Auto
Position
. Allow a few
CRT/LCD
dialog box is selected.
Color LCD
tab.
checkbox is selected.
setting is correct in the Signal
Solving Problems
159