Troubleshooting - Samsung SCZ-2273 User Manual

troubleshooting

TROUBLESHOOTING
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized technician.
PROBLEM
Nothing appears on the
screen.
The image on the screen is
dim.
The image on the screen is
dark.
The camera is not working
properly, and the surface of
the camera is hot.
The SENS-UP function does
not work.
The Motion Detection function
does not work.
Color is not correct.
The screen flickers continually. ► Check that direction of camera turns toward the Sun.
When coaxial communication
is not available:
► Ensure that your camera is supplied with rated
power as appropriate.
► Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
► If the lens is dusty, wipe it out with a clean cloth or
brush.
► Set the monitor to proper condition.
► If the camera is exposed to too strong light,
change the camera position.
► Adjust the contrast feature of the monitor.
► If you have an intermediate device, set the 75— /
Hi-z properly.
► Check that you have properly connected the
camera to an appropriate power source.
► Check that AGC of EXPOSURE SETUP menu is 'OFF'.
► Check that SHUTTER of EXPOSURE SETUP menu
is 'A.FLK' or 'MANUAL'.
► Check that MOTION DET of SPECIAL SETUP
menu is 'OFF'.
► Check the setting of WHITE BAL SETUP menu .
► Make sure that the camera and monitor are
installed within the recommended distance.
► Use the video amplifier equivalent to coaxitron if the
recommended installation distance is exceeded.
SOLUTION
English_37