LG 42PG10 Owner's Manual
Plasma tv
Hide thumbs
Also See for 42PG10:
- Owner's manual (100 pages) ,
- Owner's manual (118 pages) ,
- Owner's manual (50 pages)
Table of Contents
Advertisement
Quick Links
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR
Partner LGE U. S. A.,Inc.
has determined that this
product meets the
ENERGY STAR guidelines
for energy efficiency.
PLASMA TV
OWNER'S MANUAL
42PG10
42PG20
42PG20C
50PG30
50PG30C
Please read this manual carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote
this information to your dealer
when you require service.
www.lgusa.com / www.lg.ca / www.lgcommercial.com
50PG10
50PG20
50PG20C
60PG30
60PG30C
P/NO : SAC30708031 (0805-REV03)
Advertisement
Table of Contents
Related Manuals for LG 42PG10
Summary of Contents for LG 42PG10
- Page 1 ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA). As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines P/NO : SAC30708031 (0805-REV03) for energy efficiency. www.lgusa.com / www.lg.ca / www.lgcommercial.com...
-
Page 3: Warning / Caution
This reminder is provided to call the CATV system Do not attempt to modify this product in any way installer’s attention to Article 820-40 of the National without written authorization from LG Electronics. Electric Code (U.S.A.). The code provides guidelines for Unauthorized modification could void the user’s... -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. - Page 5 Use only with the cart, stand, tripod, bracket, of the appliance, and have the cord replaced or table specified by the manufacturer, or sold with an exact replacement part by an authorized with the apparatus. When a cart is used, use servicer.
-
Page 6: Table Of Contents
CONTENTS WARNING / CAUTION Input List ............ - Page 7 SOUND & LANGUAGE CONTROL APPENDIX Troubleshooting Auto Volume Leveler (Auto Volume) ..........
-
Page 8: Feature Of This Tv
FEATURE OF THIS TV Manufactured under license from Dolby Laboratories. is a trademark of SRS Labs, Inc. “ Dolby “and the double-D symbol are trademarks of TruSurround XT technology is incorporated under Dolby Laboratories. license from SRS Labs, Inc. -
Page 9: Preparation
Protection Cover Bolts for stand assembly Cable Holder Cable Management Clip (Refer to P.10) 42PG10/20/20C: 1EA, (Refer to P.10) Other models: 2EA (Only 42PG10/20/20C) * Wipe spots on the exterior only with the polishing cloth. * Do not wipe roughly when removing stain. Please be... -
Page 10: Front Panel Information
PREPARATION FRONT PANEL INFORMATION Image shown may differ from your TV. NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it). 42/50PG10 Remote Control Sensor Power/Standby Indicator... -
Page 11: Back Panel Information
BACK PANEL INFORMATION Image shown may differ from your TV. AV IN 2 ANTENNA/ CABLE IN RGB IN AUDIO RGB(PC) RS-232C IN (RGB/DVI) (CONTROL & SERVICE) REMOTE COMPONENT IN HDMI/DVI IN DIGITAL AUDIO OUT CONTROL IN OPTICAL AUDIO AUDIO VIDEO MONO VIDEO AV (Audio/Video) IN... -
Page 12: Stand Instruction
Image shown may differ from your TV. Installation Detachment Carefully place the TV screen side down on a Only 42PG10/20/20C cushioned surface to protect the screen from damage. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. -
Page 13: Cable Management
CABLE HOLDER CABLE MANAGEMENT CLIP CABLE MANAGEMENT CLIP How to remove the CABLE MANAGEMENT CLIP 42PG10/20/20C 50PG10/20/20C, 50/60PG30, 50/60PG30C First, press the cable management. Hold the Hold the CABLE MANAGEMENT CLIP with C C A A B B L L E E M M A A N N A A G G E E M M E E N N T T C C L L I I P P with both both hands and pull it upward. -
Page 14: Desktop Pedestal Installation
PREPARATION DESKTOP PEDESTAL INSTALLATION Image shown may differ from your TV. For proper ventilation, allow a clearance of 4 inches on all four sides from the wall. 4 inches 4 inches 4 inches 4 inches Ensure adequate ventilation by following the clearance recommendations. CAUTION Do not mount near or above any type of heat source. -
Page 15: Vesa Wall Mounting
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury. We recommend that you use an LG brand wall mount when mounting the TV to a wall. VESA Product... -
Page 16: Securing The Tv To The Wall To Prevent Falling
PREPARATION SECURING THE TV TO THE WALL TO PREVENT FALLING You should purchase necessary components to prevent TV from falling off of the stand. Image shown may differ from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. -
Page 17: Antenna Or Cable Connection
To prevent damage do not connect to the power outlet until all connections are made between the devices. ANTENNA OR CABLE CONNECTION 1. Antenna (Analog or Digital) Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) -
Page 18: External Equipment Setup
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. -
Page 19: Hdmi Connection
HDMI Connection RGB IN AUDIO RGB(PC) (RGB/DVI) 1. How to connect OMPONENT IN HDMI/DVI IN Connect the digital set-top box to H H D D M M I I / / D D V V I I I I N N 1 1 , 2 2 , or H H D D M M I I I I N N 3 3 jack on the TV. -
Page 20: Dvi To Hdmi Connection
EXTERNAL EQUIPMENT SETUP DVI to HDMI Connection 1. How to connect CABLE IN Connect the DVI output of the digital set-top box to RGB IN the H H D D M M I I / / D D V V I I I I N N 1 1 , 2 2 , or H H D D M M I I I I N N 3 3 jack on the AUDIO RGB(PC) (RGB/DVI) -
Page 21: Dvd Setup
DVD SETUP Component Connection 1. How to connect AUDIO RGB(PC) (RGB/DVI) Connect the video outputs ( Y, P ) of the DVD to the C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O 1 1 jacks on the TV. EMOTE COMPONENT IN NTROL IN... -
Page 22: How To Connect
EXTERNAL EQUIPMENT SETUP S-Video Connection AUDIO 1. How to connect S-VIDEO Connect the S-VIDEO output of the DVD to the S S - - V V I I D D E E O O input on the TV. Connect the audio outputs of the DVD to the A A U U D D I I O O input jacks on the TV. -
Page 23: Vcr Setup
VCR SETUP To avoid picture noise ( interference ) , leave an adequate distance between the VCR and TV. Use the ISM feature in the Option menu to avoid having a fixed image remain on the screen for a long period of time. - Page 24 EXTERNAL EQUIPMENT SETUP Composite (RCA) Connection ANT IN S-VIDEO VIDEO 1. How to connect Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and ANT OUT OUTPUT VCR.
-
Page 25: Other A/V Source Setup
OTHER A/V SOURCE SETUP Camcorder Video Game Set 1. How to connect Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and external equipment. Match the jack colors. -
Page 26: Pc Setup
EXTERNAL EQUIPMENT SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. RGB IN VGA (D-Sub 15 pin) Connection AUDIO RGB(PC) (RGB/DVI) 1. How to connect COMPONENT IN HDMI/DV Connect the VGA output of the PC to the R R G G B B ( ( P P C C ) ) jack on the TV. - Page 27 Supported Display Specifications (RGB-PC, HDMI-PC) NOTES Horizontal Vertical To get the the best picture quality, adjust the Resolution Frequency ( KHz ) Frequency ( Hz ) PC graphics card to 1360x768. 640x350 31.468 70.09 Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use.
-
Page 28: Screen Setup For Pc Mode
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Selecting Resolution You can choose the resolution in RGB-PC mode. The P P o o s s i i t t i i o o n n , P P h h a a s s e e , and S S i i z z e e can also be adjusted. Screen Move Prev. -
Page 29: Auto Configure
Auto Configure Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, try using the manual settings or a different resolution or refresh rate on the PC. Screen Move Prev. MENU PICTURE Move Enter Resolution •... -
Page 30: Adjustment For Screen Position, Size, And Phase
EXTERNAL EQUIPMENT SETUP Adjustment for screen Position, Size, and Phase If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This feature operates only in RGB-PC mode. Screen PICTURE Move Prev. - Page 31 Screen Reset (Reset to original factory values) Returns P P o o s s i i t t i i o o n n , S S i i z z e e , and P P h h a a s s e e to the default factory settings. This feature operates only in RGB-PC mode.
-
Page 32: Watching Tv / Channel Control
WATCHING TV / CHANNEL CONTROL REMOTE CONTROL FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER RATIO Change the aspect ratio. p p . . 4 4 4 4 RATIO SLEEP PICTURE SOUND SLEEP Select the amount of time before your TV turns off auto-... -
Page 33: Installing Batteries
THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference. (Up/Down/Left Right/ENTER) RETURN Allows the user to move return one step in an interactive application or other user interaction function. See a list of AV devices connected to TV. SIMPLINK When you toggle this button, the SIMPLINK menu appears at the screen. -
Page 34: Turning On Tv
WATCHING TV / CHANNEL CONTROL TURNING ON TV First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the I I N N P P U U T T C C H H ( ( button on the TV or press the P P O O W W E E R R... -
Page 35: Initial Setting
INITIAL SETTING This Function guides the user to easily set the essential items for viewing the TV for the first time when purchasing the TV. It will be displayed on the screen when turning the TV on for the first time. It can also be activated from the user menus. -
Page 36: Quick Menu
WATCHING TV / CHANNEL CONTROL QUICK MENU Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently. A A s s p p e e c c t t R R a a t t i i o o : Selects your desired picture format. C C a a p p t t i i o o n n : Select on or off. -
Page 37: On-Screen Menus Selection
ON-SCREEN MENUS SELECTION Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual. CHANNEL PICTURE AUDIO Move Enter Move Enter Move Enter Auto Tuning Aspect Ratio : 16:9 Auto Volume : Off Manual Tuning Picture Mode : Standard Clear Voice : On Channel Edit... -
Page 38: Channel Setup
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Auto Scan (Auto Tuning) Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. CHANNEL CHANNEL Move Enter... -
Page 39: Add/Delete Channel (Manual Tuning)
Add/Delete Channel (Manual Tuning) If selecting DTV or CADTV input signal, you can view the on-screen signal strength monitor to see the quality of the signal being received. CHANNEL CHANNEL Move Enter Move Enter Auto Tuning Auto Tuning Manual Tuning Manual Tuning Channel Edit Channel Edit... -
Page 40: Channel Editing
WATCHING TV / CHANNEL CONTROL CHANNEL SETUP Channel Editing A channel list can be created by toggling each channel on or off with ENTER button. The channels in the list are displayed in black and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top- right corner of the screen. -
Page 41: Input List
INPUT LIST Only these input signals which are connected to a TV can be activated and selected. Component1 Component2 INPUT ENTER Select the desired input source. Component1 Component2 HDMI3 HDMI2 HDMI1 RGB-PC T T V V : Select it to watch over-the-air, cable and digital cable broadcasts. -
Page 42: Input Label
WATCHING TV / CHANNEL CONTROL INPUT LABEL You can set a label for each input source when it's not in use. OPTION OPTION Move Enter Move Enter Language : English Language : English Input Label Input Label SIMPLINK : On SIMPLINK : On Key Lock... -
Page 43: Av Mode
AV MODE You can select the optimal images and sounds. Cinema Game Sport AV MODE Press the A A V V M M O O D D E E button repeatedly to select the desired source. RETURN Return to TV viewing. If you select “C C i i n n e e m m a a ”... -
Page 44: Simplink
WATCHING TV / CHANNEL CONTROL This function operates only with devices with the logo. The TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected with HDMI cable without additional cables and settings. -
Page 45: Simplink Functions
SIMPLINK Functions D D i i r r e e c c t t P P l l a a y y : : After connecting AV devices to the TV, you can directly control the devices and play media with- out additional settings. -
Page 46: Picture Control
PICTURE CONTROL PICTURE SIZE (ASPECT RATIO) CONTROL This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. RGB-PC input source use 4:3 or 16:9 aspect ratio. NOTE If a fixed image is displayed on the screen for a long time, the image could become imprinted on the screen and remain visible. - Page 47 Set by program Zoom 1 Selects the proper picture proportion to match Choose Zoom 1 when you want to view the pic- the source’s image. ture without any alteration. However, the top and bottom portions of the picture will be cropped. (4:3 4:3) (16:9...
-
Page 48: Preset Picture Settings
PICTURE CONTROL PRESET PICTURE SETTINGS Picture Mode - Preset There are factory presets for picture settings available in the user menus. You can use a preset, change each setting manually. Q.Menu Aspect Ratio 16:9 Power Saving Vivid Standard Cinema Clear Voice Vivid Picture Mode Standard... -
Page 49: Color Tone - Preset
Color Tone - Preset Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. PICTURE PICTURE Move Enter Move Enter • Contrast •... -
Page 50: Manual Picture Adjustment
PICTURE CONTROL MANUAL PICTURE ADJUSTMENT Picture Mode - User Mode Adjust the picture appearance to suit your preference and viewing situations. PICTURE Move Enter Aspect Ratio : 16:9 Picture Mode : Standard • Contrast • Contrast • Brightness • Sharpness Enter •... -
Page 51: Picture Mode - Expert Control
Picture Mode - Expert Control By segmenting categories, E E x x p p e e r r t t 1 1 and E E x x p p e e r r t t 2 2 provide more categories which users can set as they see fit, offering the optimal picture quality for users. -
Page 52: Picture Improvement Technology
PICTURE CONTROL PICTURE IMPROVEMENT TECHNOLOGY Fresh Contrast: Optimizes the contrast automatically according to the brightness of the reflection. Fresh Color: Adjusts the color of the reflection automatically to reproduce as close as possible natural colors. Noise Reduction: Removes interference up to the point where it does not damage the original picture. Gamma: High gamma values display whitish images and low gamma values display high contrast images. -
Page 53: Advanced Control - Black (Darkness) Level
ADVANCED CONTROL - BLACK (DARKNESS) LEVEL Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature is disable in DTV and RGB-PC mode. PICTURE PICTURE Move Enter Move Enter Color Temperature Medium •... -
Page 54: Advanced Control - Film Mode
PICTURE CONTROL ADVANCED CONTROL - FILM MODE Set up the TV for the best picture appearance for viewing movies. When you operate Film Mode (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in TV (Analog TV/CATV, Digital DTV/CADTV), AV1, AV2, Component 480i/1080i, and HDMI 1080i mode. -
Page 55: Picture Reset
PICTURE RESET Settings of the selected picture modes return to the default factory settings. PICTURE PICTURE Move Enter Move Enter • Contrast • Contrast • Brightness • Brightness • Sharpness • Sharpness Resetting video configuration... • Color • Color • Tint •... -
Page 56: Image Sticking Minimization (Ism) Method
PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen still picture from a PC/video game displayed on the screen for prolonged periods can result in a ghost image. You can use Orbiter to help prevent image sticking. The other two functions are for removing a ghost image. -
Page 57: Power Saving Picture Mode
POWER SAVING PICTURE MODE It reduces the plasma display’s power consumption. OPTION OPTION Move Enter Move Enter Language : English Language : English Input Label Input Label SIMPLINK : On SIMPLINK : On Key Lock : Off Key Lock : Off Caption : Off Caption... -
Page 58: Sound & Language Control
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER (AUTO VOLUME) Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : On Clear Voice... -
Page 59: Clear Voice
CLEAR VOICE By differentiating the human sound range from others, it improves the sound quality of voices. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice : On Clear Voice : On Balance Balance Sound Mode : Standard... -
Page 60: Preset Sound Setting (Sound Mode)
SOUND & LANGUAGE CONTROL PRESET SOUND SETTINGS (SOUND MODE) Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S S t t a a n n d d a a r r d d , M M u u s s i i c c , C C i i n n e e m m a a , S S p p o o r r t t , and G G a a m m e e are preset for optimum sound quality at the factory and are not adjustable. -
Page 61: Sound Setting Adjustment - User Mode
SOUND SETTING ADJUSTMENT - USER MODE Adjust the sound to suit your taste and room situations. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice : On Clear Voice : On Balance Balance Sound Mode : Standard Sound Mode... -
Page 62: Balance
SOUND & LANGUAGE CONTROL BALANCE Adjust the left/right sound of speaker to suit your taste and room situations. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice : On Clear Voice : On Balance Balance Balance... -
Page 63: Tv Speakers On/Off Setup
TV SPEAKERS ON/OFF SETUP Turn the TV speakers off if using external audio equipment. AUDIO AUDIO Move Enter Move Enter Clear Voice : On Clear Voice : On Balance Balance Sound Mode : Standard Sound Mode : Standard • SRS TruSurround XT: Off •... -
Page 64: Audio Reset
SOUND & LANGUAGE CONTROL AUDIO RESET Settings of the selected Sound Mode return to the default factory settings. AUDIO AUDIO Move Enter Move Enter Auto Volume : Off Auto Volume : Off Clear Voice : On Clear Voice : On Balance Balance Resetting audio configuration... -
Page 65: Stereo/Sap Broadcasts Setup
STEREO/SAP BROADCAST SETUP For Analog only: This TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accom- panies the stereo program if the station transmits an additional sound signal. Mono sound is automatically used if the broadcast is only in Mono. Q.Menu Aspect Ratio 16:9... -
Page 66: Audio Language
SOUND & LANGUAGE CONTROL AUDIO LANGUAGE Other languages may be available if a digital signal is provided by the broadcasting station. This feature operates only in DTV/CADTV mode. OPTION OPTION Move Enter Move Enter Language : English Language : English Input Label Input Label English... -
Page 67: On-Screen Menus Language Selection
ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. OPTION OPTION Move Enter Move Enter Language : English Language : English Input Label Input Label English Menu SIMPLINK : On SIMPLINK : On English Audio Key Lock... -
Page 68: Caption Mode
SOUND & LANGUAGE CONTROL CAPTION MODE Analog Broadcasting System Captions Caption must be provided to help people with hearing loss watch TV. Select a caption mode for displaying cap- tioning information if provided on a program. Analog caption displays information at any position on the screen and is usually the program's dialog. -
Page 69: Digital Broadcasting System Captions
Digital Broadcasting System Captions Choose the language you want the DTV/CADTV Captions to appear in. Other Languages can be chosen for digital sources only if they are included on the program. This function in only available when Caption Mode is set On. OPTION OPTION Move... -
Page 70: Caption Option
SOUND & LANGUAGE CONTROL Caption Option Customize the DTV/CADTV captions that appear on your screen. This function in only available when Caption Mode is set On. OPTION OPTION Move Enter Move Enter Custom Language : English Language : English Size A Standard Input Label Input Label... -
Page 71: Time Setting
TIME SETTING CLOCK SETTING Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually if the current time is set incorrectly by the auto clock function. TIME TIME Move... -
Page 72: Manual Clock Setup
TIME SETTING Manual Clock Setup If the current time setting is wrong, set the clock manually. TIME TIME Move Move Enter Enter Manual Clock : Feb/21/2008/ 2:10 AM Clock : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off Year 2008 On Time... -
Page 73: Auto On/Off Time Setting
AUTO ON/OFF TIME SETTING This function operates only if the current time has been set. The O O f f f f T T i i m m e e function overrides the O O n n T T i i m m e e function if they are both set to the same time. The TV must be in standby mode for the O O n n T T i i m m e e to work. -
Page 74: Sleep Timer Setting
TIME SETTING SLEEP TIMER SETTING The Sleep Time turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. Q.Menu Aspect Ratio 16:9 Power Saving Clear Voice Vivid Picture Mode Standard Sound Mode Caption English... -
Page 75: Auto Shut-Off Setting
AUTO SHUT-OFF SETTING TV will be automatically turned off, in case of no signal for 10 minutes. TIME TIME Move Enter Move Enter Clock : Feb/21/2008/ 2:10 AM Clock : Feb/21/2008/ 2:10 AM Off Time : Off Off Time : Off On Time : Off On Time... -
Page 76: Parental Control / Ratings
PARENTAL CONTROL / RATINGS Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broad- casting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. -
Page 77: Lock System
Lock System Enables or disables the blocking scheme you set up previously. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : On Set Password Set Password Block Channel Block Channel Movie Rating Movie Rating TV Rating-Children TV Rating-Children TV Rating-General TV Rating-General... -
Page 78: Set Password
PARENTAL CONTROL / RATINGS Set Password Change the password by inputting a new password twice. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel Confirm Movie Rating Movie Rating TV Rating-Children TV Rating-Children... -
Page 79: Channel Blocking
CHANNEL BLOCKING Blocks any channels that you do not want to watch or that you do not want your children to watch. LOCK Move Enter Lock System : Off Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block Block/Unblock Move... -
Page 80: Movie & Tv Rating
PARENTAL CONTROL / RATINGS MOVIE & TV RATING Movie Rating (MPAA) - For USA only Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas. - Page 81 TV Rating Children - For USA only Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audi- ences in the TV Rating - sub menu, your children can view those programs.
- Page 82 PARENTAL CONTROL / RATINGS TV Rating General - For USA only Based on the ratings, blocks certain TV programs that you and your family do not want to view. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password...
- Page 83 TV Rating English - For CANADA only Selecting canadian english language rating system. LOCK LOCK Move Enter Move Enter Blocking off : Permits all Lock System : Off Lock System : Off programs Set Password Set Password Block Channel Block Channel TV Rating-English TV Rating-English TV Rating-French...
- Page 84 PARENTAL CONTROL / RATINGS TV Rating French - For CANADA only Selecting canadian french language rating system. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Blocking off : Permits all Set Password Set Password programs Block Channel Block Channel...
-
Page 85: Downloadable Rating
DOWNLOADABLE RATING This function may become available in the future and will be available only for digital channels. This function operates only when TV has received Region5 Rating data. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password... -
Page 86: External Input Blocking
PARENTAL CONTROL / RATINGS EXTERNAL INPUT BLOCKING Enables you to block an input. LOCK LOCK Move Enter Move Enter Lock System : Off Lock System : Off Set Password Set Password Block Channel Block Channel Component1 Movie Rating Movie Rating Component2 TV Rating-Children TV Rating-Children... -
Page 87: Key Lock
KEY LOCK The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off. OPTION OPTION Move... -
Page 88: Appendix
APPENDIX TROUBLESHOOTING T T h h e e o o p p e e r r a a t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k n n o o r r m m a a l l l l y y . . Check to see if there is any object between the product and the remote control causing obstruction. - Page 89 T T h h e e a a u u d d i i o o f f u u n n c c t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k . . Press the VOL or VOLUME button.
-
Page 90: Maintenance
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges. PRODUCT SPECIFICATIONS 42PG10 42PG20 (42PG20-UA) MODEL... - Page 91 50PG10 50PG20 (50PG20-UA) MODELS (50PG10-UA) 50PG20C (50PG20C-UA) 48.2 x 33.4 x 14.3 inches 48.2 x 33.4 x 14.3 inches With stand Dimensions 1224.7 x 849.0 x 364.0 mm 1224.7 x 849.0 x 364.0 mm (Width x Height 48.2 x 31.1 x 3.2 inches 48.2 x 31.1 x 3.3 inches Without stand x Depth)
-
Page 92: Ir Codes
APPENDIX IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform Single pulse, modulated with 37 .917KHz signal at 455KHz Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3 Configuration of frame 1st frame... - Page 93 Code Code Function Note Function Note (Hexa) (Hexa) POWER Remote control Button (Power On/Off) Discrete IR Code Q.MENU Remote control Button (TV Input Selection) MENU Remote control Button POWER ON Discrete IR Code INPUT Remote control Button (Only Power On) 10-19 Number Key 0-9 Remote control Button...
-
Page 94: External Control Through Rs-232C
APPENDIX EXTERNAL CONTROL THROUGH RS-232C The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) to control the TV’s functions externally. Note: RS-232C on this unit is intended to be used with third party RS-232C control hardware and software. The instructions below are provided to help with programming software or to test functionality using telenet software. -
Page 95: Set Id
RS-232C Configurations Either cable below can be used. 7-Wire Configuration 3-Wire Configurations ( Serial female-female NULL modem cable ) ( Not standard ) D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 Set ID Use this function to specify a TV ID number. Refer to ‘Real Data Mapping’. -
Page 96: Command Reference List
APPENDIX Command Reference List DATA DATA C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 C C O O M M M M A A N N D D 1 1 C C O O M M M M A A N N D D 2 2 (Hexadecimal) (Hexadecimal) 01. - Page 97 0 0 1 1 . . P P o o w w e e r r ( ( C C o o m m m m a a n n d d : : k k a a ) ) 0 0 6 6 .
- Page 98 APPENDIX 1 1 2 2 . . O O S S D D S S e e l l e e c c t t ( ( C C o o m m m m a a n n d d : : k k l l ) ) 1 1 8 8 .
- Page 99 Data 05: Main/Sub Two/One Using Physical Step Part Channel Picture Channel Reserved Main NTSC Air No Use NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved 2 2 2 2 . . C C h h a a n n n n e e l l A A d d d d / / D D e e l l ( ( C C o o m m m m a a n n d d : : m m b b ) ) The table above lists the binary code which must be converted to Hexadecimal before sending.