Connections - Panasonic TH-50LFB70U Operating Instructions Manual

Connections

AC cord connection and fi xing, cable fi xing
When using the Wall-hanging bracket (vertical) (for 50 inch model)
Note:
When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes
the clamper is used on the hole
50 inch model
Using the clamper
Secure any excess cables with clamper as required.
Note:
One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.
If you need more clampers, purchase them from your dealer. (Available from the customer service)
1
Attach the clamper
hole
Insert the clamper
in a hole.
12
AC cord fi xing
Plug the AC cord into the display unit.
Plug the AC cord until it clicks.
Note:
Make sure that the AC cord is locked on
both the left and right sides.
, the cables may be caught by the wall-hanging bracket.
65 inch model
2
To remove from the unit:
snaps
Keep pushing
both side snaps
hooks
Unplug the AC cord
Unplug the AC cord pressing the
two knobs.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet fi rst.
and to secure the cables. If
Bundle the cables
To loosen:
Set the
knob
tip in the
hooks
Keep
pushing
the knob