Sony DWR-R02D User Manual page 10

Add a new device: Opens the "Add a new device"
window. Use this when entering IP addresses to add
devices to the device window manually.
For details, see "Manually adding a receiver/RMU-01 to
the device list window" on page 20.
Search devices: Automatically detects the receivers and
RMU-01 units on the same subnet (available in online
mode only).
Omit IP address list: Opens the Omit IP address list
window (available in offline mode only).
For details, see "Omit IP address list Window" on
page 34.
Setting lock: Opens the "Setting lock" window. Use this
to disable or enable the modification of receiver and
transmitter settings from Wireless Studio.
For details, see "Setting lock Window" on page 35.
Pairing wizard: Opens the "Pairing Wizard" dialog box.
Use this to pair receiver channels and transmitters.
For details, see "Pairing Receiver Channels and
Transmitters" on page 14.
Channel Plan Adviser: Opens the "Channel Plan
Adviser" window. Use this to select channel plans using
Channel Plan Adviser.
For details, see "Selecting Channel Plans" on page 13
and "Channel Plan Adviser Window" on page 30.
Option menu
The Option menu has the following commands:
Receiver CH Label setting: Opens the "Receiver CH
Label setting" window. Use this to configure labels for
each receiver channel.
For details, see "Receiver CH Label setting Window" on
page 35.
AF peak hold setting: Opens the "AF peak hold setting"
window. Use this to configure the hold settings for the
peak levels of the AF/PEAK level meters.
For details, see "AF peak hold setting Window" on
page 36.
Startup setting: Opens the "Startup setting" window. Use
this to configure startup operations for Wireless Studio.
For details, see "Startup setting Window" on page 36.
10
Menus
Region setting: Opens the "Region setting" window. Use
this when you want to use a receiver model from a region
other than the region selected during Wireless Studio
installation.
For details, see "Region setting Window" on page 37.
About menu
The About menu has the following commands:
Link to Message Log: Opens the folder in which log files
for warnings and error messages are stored. Messages that
appear in the Message Log tab of the sub window are
automatically saved as log files.
System version information: Opens the "System version
information" window. Displays the versions of the
receivers and RMU-01 units on the network, and the
transmitter versions received from the transmitters by the
receivers.
Version information: Indicates the version of the
Wireless Studio software.