Supplying Toner - Canon 1130 Service Manual

F. Supplying Toner
The copier is equipped with four hoppers (M, C, Y, and Bk), each one operating when its
respective toner supply clutch turns on to supply the respective developing assembly with toner.
Item
Hopper motor (M10)
Toner level sensor
Add Toner indicator
The hopper motor rotates in reverse for the following to stir the inside of the hopper:
1. When FUNCTION>INSTALL>HP-STIR-4 is executed in service mode at time of initial
installation or after replacement of the hopper (for about 2 min).
2. When a toner absent condition is ended at the end of toner supply operation and the right front
cover is closed (for about 30 sec).
C
M
Bk
COPYRIGHT © 2002 CANON INC.
DC motor
Piezoelectric oscillator
Turns on the control panel at the end of copying operation
Table 6-406
Y
Figure 6-413
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
Description
C hopper
Toner level sensor (TS2)
To C developing
assembly
Toner supply clutch (CL6)
6-47