Notes On Using The Lcd Panel; Adjusting The Lcd Panel Angle; Inserting/Ejecting/Connecting Media; Inserting And Ejecting A Disc - Pioneer AVIC-8000NEX Operation Manual

Pioneer avic-8000nex; avic-7000nex; avic-6000nex; avic-5000nex; avic-x8610bs multimedia navigation receiver
Hide thumbs Also See for AVIC-8000NEX:
Table of Contents

Advertisement

Chapter
02
Basic operation

Notes on using the LCD panel

8000NEX 7000NEX
WARNING
! Keep hands and fingers clear of this product
when opening, closing, or adjusting the LCD
panel. Be especially cautious of children's
hands and fingers.
! Do not use with the LCD panel left open. If the
LCD panel is left open, it may result in injury
in the event of an accident.
CAUTION
! Do not open or close the LCD panel by force.
This may cause a malfunction.
! Do not operate this product until the LCD
panel has completely opened or closed. If this
product is operated while the LCD panel is
opening or closing, the LCD panel may stop at
that angle for safety.
! Do not place a glass or can on the open LCD
panel. Doing so may break this product.

Adjusting the LCD panel angle

8000NEX 7000NEX
1
Press the h button.
The following screen appears.
2
Touch the following keys to adjust the
angle of the LCD panel.
Laying the panel down.
Returning the panel to the upright
position.
3
Touch the following key.
Returns to the previous screen.
14
En
p The adjusted angle of the LCD panel will be
memorized and the LCD panel will automa-
tically return to that angle the next time the
LCD panel is opened or closed.
Inserting/ejecting/
connecting media
CAUTION
! Do not insert anything other than a disc into
the disc-loading slot.
! Do not insert anything other than SD memory
cards into the SD card slot.
! Ejecting an SD memory card during data
transfer can damage the SD memory card. Be
sure to eject the SD memory card by the pro-
cedure described in this manual.
! Do not press the h button when an SD mem-
ory card is not fully inserted. Doing so may da-
mage the card.
! Do not press the h button before an SD mem-
ory card has been completely removed. Doing
so may damage the card.

Inserting and ejecting a disc

Inserting a disc
8000NEX 7000NEX
1
Press the h button.
The following screen appears.
2
Touch the following key.
Opens the LCD panel.
3
Insert a disc into the disc-loading slot.
The disc is loaded, and the LCD panel closes.
Ejecting a disc
8000NEX 7000NEX

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avic-5000nexAvic-7000nexAvic-x8610bsAvic-6000nex

Table of Contents