1. PRODUCT NAME
Hitachi Disc Grinders, Models G 10SD2 [100 mm (4")]
2. MARKETING OBJECTIVE
We sell Models G 10SD1 and G 12S1 in the international market, where they have been favorably accepted.
However, to maintain leadership in the marketplace and promote greater sales, more powerful models with
superior dust-proof construction are demanded. To address this need, the Models G 10SD2 and G 12S2
incorporate many significant upgrades over current Models G 10SD1 and G 12S1.
In addition to these models, the Model G 13SD [125 mm (5 ")] is introduced with outstanding working efficiency
and wear resistance.
These Models are extensions of the HITACHI compact-body disc grinder series and are intended to boost sales,
and draw attention to the whole line.
3. APPLICATIONS
•
Removal of casting fin and finishing of various types of steel, bronze, aluminum and various other metallic
materials
•
Grinding of welds, or sections cut by means of a cutting torch
•
Grinding of synthetic resins, slate, brick, marble etc.
4. SELLING POINTS
Compact body: 250 mm (9-7/8")
Maker B's model: 286 (11-9/32")
Maker C's model: 257 (10-1/8")
Excellent overload durability:
1.25 times higher compared to maker B's model
1.43 times higher compared to maker C's model
G 12S2 [115 mm (4-1/2")]
G 13SD [125 mm (5")]
--- 1 ---
Wear resistance of armature coil:
3.3 times higher compared to maker B's model
2.5 times higher compared to maker C's model
High power
(with maximum output of 1,000 W)
Maker B's model: 887 W
Maker C's model: 915 W