Optical Section - Sharp AR-5012 Service Manual

3) Remove four screws, and remove the operation cabinet.
4) Remove four screws, and remove the operation PWB.
1)
2)
1)
3)
3)
4)
3)
3)
4)
5)
C. Assembly procedure
For assembly, reverse the disassembly procedure

3. Optical section

A. List
NO. Part name Ref.
1 Copy lamp unit
2 Copy lamp
3 Lens unit
B. Disassembly procedure
1) Remove four screws, and remove the rear cabinet and the rear
cabinet cover.
1)
1)
3)
1)
Note that there are 10 pawls
1)
1)
2)
1)
AR-5012 DISASSEMBLY AND ASSEMBLY 8 - 5
2) Remove the four screws, remove the operation unit, and discon-
nect the connector.
3) Remove the right cabinet.
4) Remove the left cabinet.
5) Remove the screw, and remove the rear cover.
6) Remove the table glass.
1)
5)
2)
1)
1)
7) Move the carriage to the position indicated on the figure.
8) Loosen the screw which is fixing the tension plate.
9) Move the tension plate in the arrow direction to release the ten-
sion, and remove the belt.
3)
2) 4)
1)
6)
7)
8)
4)
1)
3)