Start Signal Type
Selects the type of the start signal.
Value Range
Immediate: Sends the dialled digits to the trunk when the First Dial Timer expires.
Wink: Sends the dialled digits to the trunk when the wink signal is received.
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port
Programming Manual References
None
Feature Guide References
None
E&M TIE Line Type
Selects the type of the voice path for an E & M line.
Value Range
2 wires, 4 wires
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port
Programming Manual References
None
Feature Guide References
None
Sending Caller ID to TIE
Specifies whether Caller ID information is sent when
Value Range
No, Yes
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port
3.47 [1-1] Slot—Port Property - EM Port
Trunk Property on this screen is set to Private.
PC Programming Manual
405