Toshiba E-studio 1105 Operating Instructions Manual page 124

3. Adding Paper
3
*8 It is recommended to place one sheet at a time.
*9 The maximum number of sheets you can set at once depends on the paper's thickness and condition.
*10 If you wish to copy onto OHP transparencies, select [OHP (Transparency)].
*11 The tab sheet holder is required.
*12 Select the paper size using the paper size selector.
*13 The paper width of between 100 and 139.7 mm are available only when the special side fence is utilized.
*14 The paper width of between 3.94 and 5.50 inches are available only when the special side fence is utilized.
*15 The following paper sizes cannot be used if the LCT is installed: 13 × 19
3
, 12 / × 18
5
Paper Thickness
Paper Thickness
Thin Paper
Plain Paper
Middle Thick
Thick Paper 1
Thick Paper 2
Thick Paper 3
*1 Print quality will decrease if the paper you are using is close to the minimum or maximum weight. Change
the paper weight setting to thinner or thicker.
• Certain types of paper produce noise when delivered. This noise does not indicate a problem and
print quality is unaffected. (OHP transparencies can produce noise when delivered.)
• When loading paper in the paper trays 1 3, place the print side face down.
122
BAV025S
1
/ , 13 × 18 , SRA3 , SRA4 , 226 × 310 mm , 310 × 432 mm
2
*1
40 51 g/m
52 105 g/m
106 163 g/m
164 216 g/m
217 256 g/m
257 300 g/m
1
/
5
Metric version
2
11 14 lb. Bond
2
14 28 lb. Bond
2
28 lb. Bond 90 lb. Index
2
90 lb. Index 80 lb. Cover
2
80 lb. Cover 140 lb. Index
2
140 lb. Index 110 lb. Cover
3 1
, 13 × 19 , 12 / × 19
5
Inch version (Bond paper)
/
5