Sony HT-CT660 Operating Instructions Manual
Hide thumbs
Also See for HT-CT660:
- Operating instructions manual (112 pages) ,
- Troubleshooting manual (13 pages) ,
- Specifications (3 pages)
Related Manuals for Sony HT-CT660
Summary of Contents for Sony HT-CT660
- Page 1 4-452-002-14(1) Home Theatre Operating Instructions US System Mode d’emploi Manual de instrucciones ES HT-CT660...
-
Page 2: Important Safety Instructions
Refer to them whenever you call upon appliance. your Sony dealer regarding this product. As the main plug is used to disconnect Model No. HT-CT660 the unit from the mains, connect the unit to an easily accessible AC outlet. - Page 3 9) Do not defeat the safety purpose of NOTE: the polarized or grounding-type plug. This equipment has been tested and A polarized plug has two blades with found to comply with the limits for a one wider than the other. A Class B digital device, pursuant to Part 15 grounding type plug has two blades of the FCC Rules.
-
Page 4: Precautions
This equipment must not be co-located or operated in conjunction with any other Precautions antenna or transmitter. On safety This equipment complies with FCC Should any solid object or liquid fall into radiation exposure limits set forth for an uncontrolled environment and meets the the system, unplug the system and FCC radio frequency (RF) Exposure... - Page 5 HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the If color irregularity is observed United States and other countries. again... Place the system further away from the “BRAVIA” logo is a trademark of Sony TV set. Corporation. continued...
-
Page 6: Technology
“PlayStation ” is a registered trademark ® conditions. of Sony Computer Entertainment Inc. When a person, metal object, wall or other obstruction is between the The N Mark is a trademark or registered devices with a BLUETOOTH trademark of NFC Forum, Inc. - Page 7 BLUETOOTH technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using BLUETOOTH technology.
-
Page 8: Table Of Contents
Table of contents Precautions ........4 Additional Information BLUETOOTH wireless Troubleshooting ...... 31 technology ......6 Specifications ......34 Index ........37 Getting Started Unpacking ........9 Index to parts and controls ..10 Connecting a TV, player, etc........14 Positioning the system ... 16 Setting up the Wireless System ....... -
Page 9: Unpacking
Getting Started Unpacking Subwoofer (SA-WCT660) (1) Inserting batteries into the remote control Insert two R6 (size AA) batteries (supplied) by matching the and ends on the batteries to the diagram inside the battery compartment of the remote control. To use the remote ... -
Page 10: Index To Parts And Controls
Index to parts and controls For more information, see the pages indicated in parentheses. Sound Bar (on/standby) button Message display area PAIRING button (page 23) Displays volume, selected input source, etc. INPUT button NIGHT (page 28) Press to select the input source to Lights up in NIGHT mode. - Page 11 Jacks (on the rear of Sound Bar) AC power cord (mains lead) OPTICAL IN jack (page 14, 15) (page 14) HDMI TV OUT (ARC) jack HDMI IN 1/IN 2 jacks (page 14) (page 14) ANALOG IN jack (page 15) ...
-
Page 12: Remote Control
To control the system Remote control INPUT (page 19) Press to select the equipment you This section describes how to operate want to use. the subwoofer, Sound Bar, and (on/standby) connected equipment using the SOUND FIELD +/ (page 26) remote control supplied. -
Page 13: Setting Manufacturer Of Controllable Tvs
While holding down the TV button, press the button corresponding to the manufacturer. Manufacturer Button TV VOL + SONY TV CH + Samsung SOUND FIELD + TV VOL Panasonic TV CH VIZIO ... -
Page 14: Connecting A Tv, Player, Etc
Connecting a TV, player, etc. Before connecting the AC power cord (mains lead) to a wall outlet (mains), connect all other equipment and a TV to the system. No cable connection is required between the Sound Bar and the subwoofer because they can be connected wirelessly. -
Page 15: Connecting Audio Equipment
Even if the system is turned off (active standby mode), the HDMI signal will be sent from the connected equipment to the TV via the HDMI connection. You can enjoy image and sound from the equipment on the TV. Connecting equipment with an HDMI jack HDMI OUT HDMI cable... -
Page 16: Positioning The System
Positioning the system The illustrations below are examples of how to install the Sound Bar. Installing the Sound Bar Installing the Sound Bar on a rack Installing the Sound Bar on a wall (page 17) (page 17) Notes ... -
Page 17: Installing The Sound Bar On A Wall
Sony dealers or licensed contractors and pay special attention to safety Center during the installation. stand Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength, improper screw installation or natural calamity, etc. continued... -
Page 18: Setting Up The Wireless System
Prepare screws (not supplied) Hang the Sound Bar onto the that are suitable for the holes on screws. the back of the Sound Bar. Align the holes on the back of the Sound Bar to the screws, then hang the Sound Bar onto the 4 mm 2 screws. -
Page 19: Operations And Features
Using the Control for Operations and Features HDMI function Operating the system By enabling the Control for HDMI using the supplied function (CTRL, page 28), and connecting equipment that is remote control compatible with the Control for HDMI function via an HDMI cable, operation is simplified with the features below. -
Page 20: Using "Bravia" Sync Features
Standard HDMI cable, 1080p, Deep Color, or 3D/4K images may not be displayed properly. We recommend that you use an HDMI authorized cable or a Sony HDMI cable. We do not recommend using an HDMI-DVI conversion cable. -
Page 21: Setting Up The Sound Output Of The Connected Equipment
HDMI jack may be suppressed by the connected equipment. Setting up the sound Sound may be interrupted when the output of the connected sampling frequency or the number of channels of audio output signals equipment from the playback equipment is switched. -
Page 22: Bluetooth Function
When the detected devices are connected devices, refer to the operating instructions supplied with the listed on the BLUETOOTH devices. device, check that “HT-CT660” is The BLUETOOTH devices to be listed. connected must support A2DP On some BLUETOOTH devices, the (Advanced Audio Distribution Profile). - Page 23 Once a pairing operation is performed, minutes. If pairing is not successful, it does not have to be performed again. redo the procedure from step 1. However, you must repeat pairing in the If you wish to pair with several cases listed below.
- Page 24 Fees may be charged for To disconnect the system, touch it downloading the app. with the smartphone again. Use a two-dimensional code Tips reader app. If you cannot connect the system, try the following. Start the app on the smartphone, and move the smartphone slowly over the N mark of the Sound Bar.
- Page 25 Start playback on the Finishing the BLUETOOTH BLUETOOTH device. connection For details on operation, see “To control a BLUETOOTH device” Terminate the BLUETOOTH (page 13). connection by any of the operations Adjust the volume. listed below. Operate the BLUETOOTH device to Set the volume of the BLUETOOTH terminate the connection.
-
Page 26: Surround Function
Available sound fields Surround Function Sound field Effect Suits various sources. (Standard) Enjoying the surround MOVIE Recreates powerful and effect realistic sound, along with clear dialog. DRAMA Recreates the clear dialog This system can create multi-channel of TV dramas. surround sound. You can select one of NEWS Recreates the clear speech system’s optimized pre-programmed... -
Page 27: Advanced Settings
Advanced Settings Settings and adjustments using the AMP menu Using the AMP menu You can set the following items with AMP MENU on the remote control. The default settings are underlined. Your settings are retained even if you disconnect the AC power cord (mains lead). Press AMP MENU to turn on the AMP menu. - Page 28 Menu items Function AUDIO SYNC You can delay the sound using this function when the image (AV SYNC) is slower than the sound. ON: Adjusts the difference between picture and sound. OFF: No adjustment. DUAL You can enjoy multiplex broadcast sound when the system (DUAL MONO) receives a Dolby Digital multiplex broadcast signal.
- Page 29 Menu items Function SET BT BT.STBY When the system has pairing information, the system is in (BT STANDBY) BLUETOOTH standby mode even when it is turned off. ON: BLUETOOTH standby mode is enabled. The illumination LED flashes in blue slowly when the system is turned off.
-
Page 30: Linking The System (Link)
Linking the system (LINK) You can link the Sound Bar and the subwoofer again to enable wireless transmission between them. Press AMP MENU. Select “WS” in with (select), or (proceed). then press Select “LINK,” then press (proceed). “START”... -
Page 31: Additional Information Bluetooth Wireless Troubleshooting
Audio Return Channel (ARC) requesting repairs. Should any technology, connect the digital problem persist, consult your nearest optical cable in addition to the HDMI Sony dealer. cable (page 14) in order to output sound. POWER The sound is output from both the The system is not turned on. - Page 32 (page 30). When you are watching movies, you Flashes in green quickly: may hear the sound with a slight Consult your nearest Sony delay from the image. dealer. The BLUETOOTH connection cannot Sound skips or has noise.
- Page 33 Change the Wi-Fi frequency of the “PROTECT” appears on the front Wi-Fi router, computer, etc., to panel display. 5 GHz band. Press to turn off the system. After “STBY” disappears, disconnect OTHERS the AC power cord (mains lead), The remote control does not then check that nothing is blocking function.
-
Page 34: Specifications
Specifications Formats supported by this system Dolby Digital DTS-HD Master Audio* Dolby Digital Plus* DTS-HD High Resolution Audio* Dolby TrueHD* DTS-HD Low Bit Rate* Linear PCM 2ch 48 kHz or less DTS 96/24 Linear PCM Maximum 7.1ch 192 kHz or less* * It is possible to input these formats only with HDMI connection. - Page 35 Sound Bar (SA-CT660) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs Amplifier section , AAC U.S. models: Transmission range (A2DP) POWER OUTPUT AND TOTAL HARMONIC 20 Hz - 20,000 Hz (Sampling DISTORTION: frequency 44.1 kHz) (FTC) 1) The actual range will vary depending Front L + Front R: on factors such as obstacles between With 3 ohms loads, both channels...
- Page 36 Mass (approx.) 3.5 kg (7 Ib 11 1/2 oz) Subwoofer (SA-WCT660) POWER OUTPUT (reference) 130 W (per channel at 4 ohms, 100 Hz) Speaker system Subwoofer, Bass reflex Speaker unit 160 mm (6 3/8 in) cone type Rated impedance 4 ohms Power requirements 120 V AC, 60 Hz Power consumption...
-
Page 37: Getting Started Index
Index A. STBY 29 NIGHT 28 AAC 29 AAV 28 AMP menu 27 P. THRU 28 ARC 28 Positioning the system 16 PROTECT 33 BASS 27 BLUETOOTH 6, 22 Remote control BT.STBY 29 operating 12 preparing 9 Reset 33 Connecting RF CHK 29 Digital optical cable 14 DVD player 14... - Page 38 4-452-002-14(1) ©2013 Sony Corporation Printed in Malaysia...