Turning On The Power - Sony EVI-D100 Operating Instructions Manual

Notes
• You cannot connect your Color
Video Camera to a computer that is
not equipped with either video input
or an S-Video input jack. You might
not be able to use your existing
computer with your Color Video
Camera unless you provide the
computer with a video capture board
and/or software. Consult your
computer dealer or manufacturer for
details.
• Use only the AC power adaptor
(MPA-AC1) supplied with the unit.
Do not use any other AC power
adaptor.
Polarity of the plug

Turning on the Power

1
Connect the main unit to an AC
outlet using the supplied AC
power adaptor and power cord.
The POWER lamp lights up.
As long as the main unit is
connected to an AC outlet, you
can turn the camera on or off with
the POWER switch on the
Remote Commander. (When you
turn the power off using the
Remote Commander, the POWER
lamp turns off and the STANDBY
lamp lights up.)
When the power is turned on, the
camera will automatically face
first toward the upper left-hand
side, and then the front, which is
the home position of the camera.
(Pan/tilt reset action)
to AC outlet
2
Turn on the peripheral devices.
Basic Operations
Lights up
33