Panasonic AJ-RC10G Operation Manual page 13

Parts and functions
!20" !21"
!22"
!23"
!27"
!20" 3 button
!21" 4 button
This button switches the display on the LCD
panel and selects a medium item from the
menu of the unit.
The lamp is on when the button is pressed
and off when the button is released.
!22" MENU ON button
To open the menu on the camera recorder,
press this button continuously for 3 seconds.
In this case, a message "CAMERA MENU
OPEN" is displayed on the LCD panel. The
lamp is on at this time, and operations of the
menu and the scene file on the unit are not
available.
If this button is pressed when the menu of
the camera recorder is open, the display
menu will return to the previous level in the
menu hierarchy. If the highest level is
displayed, the menu will be closed.
(Continued)
!24" !25" !26"
!23" CHARA ON button
This is used for selecting whether characters
overlap the video signals output from the
VIDEO OUT terminal of the unit and the
VIDEO OUT terminal of the main unit of the
AG-HPX500.
When the power is on, the unit is in the state it
was before turning off the power.
The lamp is on when characters are loaded
onto the signals, while it is off when characters
are not loaded.
However, if the recording format is set to 720P
or 1080i, and CMPNT/SDI SEL is set to 480i
(576i), the unit will operate according to the
settings for the OUTPUT CHARACTER on the
main unit of the camera recorder.
!24" Rotary encoder 1
!25" Rotary encoder 2
!26" Rotary encoder 3
This is used for operating the menu on the
LCD panel or the camera menu.
The camera menu is operated by using the
right rotary encoder.
The operation of the rotary encoder is the
same as the JOG switch on the camera (+,
–, PUSH)
!27" Vacant button
This is a vacant button for which no function
is assigned.
E-12