Yamaha RX-A3040 Quick Manual page 2

■ Connections
Caution
• Before connecting the speakers, remove the unit's power cable from the AC wall outlet.
• Ensure that the core wires of the speaker cable do not touch each other or come into contact with the
unit's metal areas. This may damage the unit or the speakers.
• Connect the speakers with the correct polarity.
1
Connect the speakers in Zone2 to the EXTRA SP 2 terminals with
speaker cables.
Skip this step if you do not use Zone2.
The unit (rear)
Left
To connect speaker cables
c
Z O
N E
R 2 /Z S P
E A
O N
+ (red) K E
b E R S
E X 3 /R
T R .P
A R E
S P S E
2
N C
E
L
a a
d
- (black)
2
EXTRA SP 2 terminals
SPEAKERS
ZONE 2/ZONE 3/R.PRESENCE
L
R EXTRA SP2
Right
Speakers (Zone2)
2
Connect the playback devices (such as CD players) in the main zone
to the analog stereo input jacks with stereo pin cables (RCA stereo
cables).
Skip this step if you do not use Zone2.
Analog stereo input jacks
(such as AUDIO 1–4)
The unit (rear)
L
L
R
R
• This guide explains how to connect a playback device to the unit with an analog stereo connection for
example. If you want to connect a playback device with a digital connection (HDMI, digital optical or digital
coaxial), refer to the Owner's Manual in the supplied CD-ROM.
3
Connect the TV in Zone4 to the HDMI OUT 2 (ZONE OUT) jack with an
HDMI cable.
Skip this step if you do not use Zone4.
HDMI OUT 2 (ZONE OUT)
jack
The unit (rear)
(ZONE OUT)
4
Connect the power cable to an AC wall outlet.
To operate the unit and external devices from other rooms
You can operate the unit and external devices from other rooms using the supplied
remote control if you connect an infrared signal receiver/emitter to the unit's REMOTE
IN/OUT jacks. For details, refer to the Owner's Manual in the supplied CD-ROM.
Playback device
L
(such as a CD player)
L
R
R
AUDIO
OUT
TV (Zone4)
HDMI IN
HDMI HDMI