Toshiba IPedge Installation Manual page 125

MP118 MEDIA SETTINGS
Coders
SIP Advanced Parameters
IP Profile Settings
Routing Table
Installation Manual June, 2011
12. Select Protocol Configuration > Protocol Definition > Coders
13. Ensure the following:
Coder Name G.711 mu-law
Packetization Time = 20
Rate = 64
Silence Suppression = Disabled
and
Coder Name G.729
Packetization Time = 20
Rate = 8
Silence Suppression = Disabled
14. Click on the Submit button.
15. Select Protocol Configuration > SIP Advanced Parameters >
Advanced Parameters.
Set the Disconnect on broken connection = No
Set Enable current disconnect = Enabled.
16. Click on Submit.
17. Select Protocol Configuration > Coders And Profile Definitions >
IP Profile Settings
Set the Disconnect on broken connection = No
18. Click on Submit.
19. Select Protocol Configuration > Routing Tables > Routing
General Parameters.
Set Enable alternate routing = Enabled
20. Click on Submit.
Load INI file to the Gateway
12-5