Samsung BACnet Gateway MIM-B17N Installation Manual page 26

Channel setting by indoor unit
1
Click [Channel setting by indoor unit].
2 Click [Edit] from the 'Channel setting by indoor unit' screen.
3
Check the address and the channel information of the SIM/PIM interface module
which is connected to the watt-hour meter.
 If the SIM/PIM interface modules with addresses 0 ~ 7 executes tracking, it will be
displayed as 16~23 in BACnet Gateway.
 Below table shows the channel information of the terminal which SIM and
watt-hour meter is connected. (Terminal block 1 is on the most left side in SIM.)
Terminal block
Location
Top part
Bottom part
 PIM: Channel 1 is on the most left side and 8 channels are arranged in a line.
4
Check the information of indoor/outdoor unit which is connected to watt-hour
meter.
NASAS_MIM-B17N_BACnet Gateway_IM_EN_03719A(1).indd 25
Terminal block 1 Terminal block 2
1 2
5 6
Terminal block 3 Terminal block 4
3 4
7 8
25
E-
2013-04-25 오전 10:14:38