Connecting To The Computer; Choosing The Method To Connect The Machine To The Computer; Connecting Via A Wired Lan - Canon imageCLASS MF4890dw Starter Manual

Connecting to the Computer

Check!

Choosing the Method to Connect the Machine to the Computer

First, you need to decide on the method you would like to connect your machine to the computer. Choose from the
following three options.

Connecting via a Wired LAN

(MF4890dw/MF4870dn/MF4720w Only)
You can connect the machine to the computer through a
wired router. Use the LAN cables to connect the machine
to the wired router (or hub).
Make sure that there is an available port in the router to
connect the machine and the computer.
Have a LAN Cable of Category 5 twisted-pair cable or higher
ready.
Connecting via a USB
You can connect the machine to the computer using a
USB cable.
Connecting via a Wireless LAN
(MF4890dw/MF4720w Only)
You can connect the machine to the computer through a
wireless router*. Since it is connected wireless, no LAN
cables are needed.
* A wireless router (or access point) which supports
IEEE802.11b/g/n is required.
If you do not sure whether your router is wired or wireless:
See the instruction manual provided with your network device, or contact the manufacturer.
14
Downloaded from ManualsPrinter.com Manuals
LAN Cable
Wired Router
USB Cable
See "Wireless LAN Setting Guide"
Wireless Router
(Access Point)
15
P.
18
P.