Feature Keys; Ring Modes - Samsung SVMi-4 Technical Manual And User Manual

Samsung
SVMi-4 & SVM-400 Manual
NOTE: When a group is called, or a caller is transferred to a group, ringback is sent
to the caller. A busy signal will not be returned even if all group members are busy.
Obviously UCD is an exception to this rule.
Calls to a group do not follow the call forwarding instructions of any stations in the
group.

FEATURE KEYS

0 TYPE
1 RING
2 OVERFLOW
3 GRP TRSF
4
NEXT PORT
MEMBER
5
7 GROUP BUSY

RING MODES

0 SEQUENTIAL
MMC: 601
Group type (Normal, VM/AA, UCD, AA, CADENCE)
Ring mode (Sequential, distributed or uncondition-
al)
Overflow time (000 - 250 secs.)
Group transfer time (000 - 250 secs.)
Overflow port (Any station, common bell or ring
over page)
Group members (e.g., station 202, 225, 231, etc)
On/Off
The first idle station listed in the group will ring. If the
first is busy, the next idle station will ring.
Programming
MMCs