Service Information For Eeprom Ic Setting - LG DR165 Service Manual

SERVICE INFORMATION FOR EEPROM IC SETTING

MICOM START
EEPROM ID CHECK
2 BYTE(B3,248,249)
ID OK?
Yes
OPTION DATA READ
5TIME & COMPARE
Yes
MICOM NORMAL
OPERATION START
*** EEPROM INITIAL ***
- SETUP is displayed in the field if pressing the Front PROG. - & + Key with the Remocon number "clear" key pressed in the status of
powering on.
- AUTO SEARCH is done since the initial screen of ACMS is serviced if powering on.
DETECT NEW EEPROM (OPTION EDIT SCREEN)
NAME HEX
OPT1 D9
OPT2 00
OPT3 60
OPT4 41
No
OPT5 4B
OPT6 2C
OPT7 46
OPT8 12
WRITE : OK
No
MOVE : < >
MASK : 00 , EEP : FF(0R), D17
(Each mask ,eeprom, It shows a
development release version.)
BINARY
00000000
00000000
00000000
00000000
00000000
00000000
00000000
00000000
OPTION condition of Present time the
CHECK There is a Possibility of doing and
EXIT : MP the OPTION the REWRITE it is possible.
EDIT :
1-4
OPTION CONFIRMATION MODE
Press the "CLEAR" key on the
Remote controller and the
"PROG. - " key one the Front Panel
the same time, then it goes in to
Tracking initial mode.