Pairing Your Boxee Remote To The Boxee Box - D-Link DSM-380 Install Manual

Pairing your Boxee Remote to the
Boxee Box
Your remote comes from the factory already
paired to the Boxee Box. If you are noticing
interference with your remote from other
devices, you may pair the remote with the
Boxee Box in the easy steps below:
1.
Make sure to move other devices away
from the Boxee Box (or turn them off)
2. Put the remote in close proximity with
the Boxee Box.
3.
Press and hold the OK key on the side of
the remote for 5 seconds.
4.
Pairing is complete when you can
control the Boxee Box. There is no visual
indication of pairing on the device.
5.
You can immediately use the remote
control now.