Table of Contents
Advertisement
No sound
A
Check to see if the DVD player is possibly
switched to mute (
B
Check to see that all connecting cables bet-
ween the DVD player and potentially connected
audio components are firmly plugged into the
corresponding sockets
C
Check to make sure that the settings in the
OSD menu match the connections variant, with
which you have connected the audio compo-
nent to the DVD player.
D
Check by means of the televisions operating
instructions to see if settings to the television
may be necessary in order to use the DVD
player with the television.
E
Check by means of the operating instructions
for a potential connected audio component
if settings to it are necessary in order to use it
with the DVD player.
No 4:3 or 16:9 image
A
Check by means of the televisions operating in-
structions, which image formats the television
has at its disposal.
B
Check to see if the settings in the OSD menu
match the available image format of the tele-
vision.
Remote control not functioning
A
Check whether the batteries of the remote con-
trol are inserted into the battery compartment
with the correct polarity.
B
Check to see if the remote control batteries are
depleted and, if necessary change the batte-
ries.
C
Make sure that there are no obstacles located
between the remote control and the DVD player.
D
Be situated no more than five meters from the
DVD player when using the remote control.
MUTE
button).
Playback language/ Subtitle language do
not correspond to the settings in the OSD
menu
The playback language/Subtitle language setting in
the OSD menu is not available on the inserted disc.
One or several functions can not be switched
on
The selected function may not be available on all
DVDs/VCDs/S-VCDs! If you attempt to execute a func-
tion that is not available, the symbol
on the television screen.
None of the buttons on the device or on the
remote control are functioning/other mal-
functions
A
Switch the DVD player off by pressing the
POWER ON/OFF
then press the
switch the DVD player back on.
B
If the malfunction is still present: Reset the DVD
player to its default settings.
Contact one of our service partners in your
area if ...
•
the stated function defect can not be resolved
as described or
•
other functional defects arise.
For this see chapter 18 "Warranty and
service".
- 34 -
is displayed
button. Wait ten seconds and
POWER ON/OFF
button again to
Advertisement
Table of Contents
