Download Print this page

JVC FS-P550 Service Manual page 17

Compact component system
Hide thumbs Also See for FS-P550:

Advertisement

3.1.14 Removing the FL board
(See Fig.24)
• Prior to performing the following procedures, remove the side
panels L/R and front panel assembly.
(1) From the inside of the front panel assembly, remove the
four screws T attaching the FL board.
(2) Take out the FL board from the front panel assembly and
disconnect the card wire from the connector
FL board.
Reference:
When attaching the FL board, align the projections n of the
front panel assembly in the holes of the FL board.
CN751
on the
CN751
Card
wire
FL board
T
T
n
T
Front panel assembly
Fig.24
n
T
(No.MB229)1-17

Advertisement

loading