HP t620 Troubleshooting Manual page 15

Attach the stand to the right side of the computer to use it in the horizontal orientation.
a.
Lay the computer down with the right side up and locate the two screw holes in the grid
on the right side of the computer.
b. Position the stand (1) over the side of the computer and line up the captive thumbscrews
in the stand with the screw holes in the computer.
c.
Tighten the captive thumbscrews (2) securely.
6.
Reconnect the external equipment, plug the power cord into a power outlet, and then turn the
computer on.
NOTE:
Be sure that at least 10.2 centimeters (4 inches) of space on all sides of the computer
remain clear and free of obstructions.
NOTE:
An optional Quick Release mounting bracket is available from HP for mounting the computer
to a wall, desk, or swing arm. When the mounting bracket is used, do not install the computer with the
I/O ports oriented towards the ground.
Attaching the stand
7