Electrical Connection - Miele B 1312 Operating Instructions Manual

,
All electrical work must be
carried out by a suitably qualified
and competent person in
accordance with current local and
national safety regulations (BS 7671
in the UK).
This appliance is supplied with a
connection cable and moulded plug
(BS 1363) for connection to a
220 - 240 V mains supply.
The appliance must only be operated
with the voltage, frequency and fuse
rating shown on the data plate (located
in the tower behind the water
container). Please ensure these match
the household mains supply.
We recommend connecting the
appliance to the power supply via a
suitable plug and socket which must be
easily accessible for servicing and
maintenance work.
Do not connect the appliance to the
mains electricity supply by a
multi-socket adapter or an extension
lead.
These do not guarantee the required
safety of the appliance, (e.g. danger of
overheating).
For extra safety and protection we
recommend protecting the appliance
with a 30 mA residual current device
(RCD).
If the electrical connection cable is
faulty this must only be replaced by a
suitably qualified and competent
person.

Electrical connection

The appliance must not be connected
to the inverter of an autonomous power
supply, e.g. a solar power system.
When switching the appliance on, a
surge in the power could trigger the
safety cut-out mechanism. This could
damage the electronic unit.
The appliance must not be used with
so-called energy saving devices.
These reduce the energy supply to the
appliance which could then become
too warm.
If mains connection cable may only be
replaced by an original Miele spare
part.
WARNING
THIS APPLIANCE MUST BE
EARTHED
69